Harman-Kardon BDP 1 - Manual (Page 19)

19
Clear BD-Live Memory: Erases BD-Live bookmarks (which allow discs
to resume play after being paused) and any content downloaded from
the Internet.
Software Version: This item is informational only.
Reset Settings: Select to clear all user settings and return the BDP 1
to its factory defaults.
When you have finished, use the ⁄ / ¤ / ‹ / › Buttons to navigate to
another Setup menu, or press the Setup or Clear Button to clear the
menus from view.
Step Seven – Network Setup
This menu allows you to control Internet access from the BD-Live
function. To use the BD-Live Internet access function, program your
home network’s settings into the Network Setup menu.
BD-Live Web Access: The default is to always allow the BDP 1
to access the Internet when the BD-Live function is activated while a
compatible disc is playing. Select “Prohibit” to never allow access to the
Internet, or select “Limit” to display a popup box that will ask the viewer
to allow Internet access for that disc.
A USB drive with at least 1GB capacity is required for BD-Live
functionality. Select the “Storage” option in the USB Function Select
menu.
Select the Test Connectivity line. If the test runs successfully, leave the
other settings as is; BD-Live Internet access will be available when you
play a compatible disc.
If the BDP 1 is not able to access the Internet, you may have to manually
change some of the settings. Navigate to the IP Mode line and select
“Manual”. A popup screen will appear with the current network settings.
Contact your Internet service provider for the information required and
change the settings accordingly. Highlight the setting and press the
OK Button. A dialog box will appear, prompting you for the new Internet
address. Use the Numeric Keys to enter each field of the address. If the
address contains three digits, the cursor will automatically advance to the
next field. When fewer than three digits are used, press the
› Button to
advance the cursor. Press the ‹ Button to return to a previous field if
corrections are required. When the complete address has been entered,
press the
› Button to finish the entry.
If you have installed a router to create a home network, consult the
instructions or Web site for the router to obtain the information.
This completes the setup process. Press the Setup Button to clear the
Setup menus from the screen.
INITIAL SETUP