Connections and setup, Dvd player + tv with audio/video input jacks, 8chapter 1 – HP RC5240P User Manual
Page 10: Go to page 19, Dvd player, Tv dvd
8
chapter 1
Connections and Setup
S-VIDEO
VIDEO OUT
1
2
OPTICAL
COAXIAL
AUDIO OUT
L
L
R
R
1
2
DIGITAL AUDIO OUT
R
L
VIDEO IN
AUDIO IN
ANT IN
S-VIDEO
TV
AUDIO OUT
R
L
DVD
PLAYER
CABLE
OR
OFF-AIR SIGNAL
Y
P
B
P
R
DVD Player + TV with Audio/Video Input Jacks
1.
Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your
TV doesn’t have S-Video, use the basic video connection listed above.
Note: Your cable or off-air connection to the television should not be affected by this connection. Connect
your cable or off-air antenna to your television as you normally would. You may need to consult your
television manual for details.
Go to page 19
TV
DVD
1
2
15739290.03 s&c
4/19/01, 4:23 PM
8