HP RC5240P User Manual
Page 13
chapter 1
11
Connections and Setup
DVD Player + TV + Dolby Digital or DTS Receiver
To Connect the DVD Player
1.
Connect the left and right audio cables to your audio/video receiver and to the AUDIO OUT L (left –
white) and R (right – red) jacks on the back of your DVD Player.
2.
If you have a Dolby Digital or DTS receiver, insert an optical digital cable (not provided) to the DIGITAL
AUDIO OUT jack on the DVD player to the Digital Input jack on the back of the receiver. You must also
set the Digital Ouput setting in the Sound menu (see chapter 5).
3.
Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-
VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn’t have S-Video, use the basic video connection listed above.
4.
Plug the power cord into an AC outlet.
Go to page 19
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
DTS is a registered trademark of Digital Home Theater Systems, Inc.
15739290.03 s&c
4/19/01, 4:23 PM
11