HP RC5240P User Manual
Page 17
chapter 1
15
Connections and Setup
DVD Player + TV + VCR + Satellite Receiver
1.
Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO
OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn’t
have S-Video, use the basic video connection listed above.
3.
Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack on the
television.
4.
Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the
VCR.
5.
Plug the power cord into an AC outlet.
Go to page 19
15739290.03 s&c
4/19/01, 4:24 PM
15