Hitachi VTUX6430A - Manual (Page 46)

VIEWING THE ON-SCREEN DISPLAY
Switching between the clock, time counter and time of remaining
tape
Press DISPLAY while the on-screen display is displayed. The on-screen display switches in the order below
together with the VCR's display.
Press the DISPLAY button to see the clock.
Press the DISPLAY button a second time to see just the time counter.
Notes :
• The linear time counter operates only if there is something recorded on the tape.
• The counter changes to 0:00:00 when the tape is ejected.
Press the DISPLAY button a third time to see the tape remaining time.
Note: Immediately after the tape is inserted, "
-:--
" will appear. 2 minutes after playback or recording is started,
the tape remaining time is displayed.
Press the CLEAR button repeatedly to switch the type of tape is used. The correct remaining time will appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape