Hitachi VTUX6430A - Manual (Page 48)

INDEX WITH THE TIME COUNTER
To find specific sections on a tape
Indexing with the Time Counter
You can set the time counter to memorize a certain point in the video programming, and you can return to that
point automatically.
1 Press the DISPLAY button two or three times.
The counter will appear in the VCR's display.
2 Begin recording or playing back a tape.
3 At the point that you want to go back to, press the CLEAR button.
This resets the counter to 0:00:00.
4 Press the STOP button when you are done recording or playing back the tape.
5 Press the REW button to rewind the tape.
It will automatically stop at the spot where you cleared the counter in step 3.
• Press the PLAY button to watch the tape from the selected spot.
Notes:
•
Press the DISPLAY button to turn the counter display off. The selected spot will stay in memory until you set a
new one or until the tape is ejected.
• During super rewind/fast forward, the tape does not stop automatically even if the counter reads "0:00:00".