Hitachi VTUX6430A - Manual (Page 68)

PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
The VCR remote control can be programmed to control many TV brands that are remote controlled.
1 Turn on the TV.
2 Point VCR remote control toward TV.
3 Press and hold the "TV" button.
4 Press the remote button corresponding to your TV brand as shown in the set-up chart. The TV channel
will change to confirm that the remote control has been set.
TV Brand Press "TV"
and this
remote button TV Brand Press "TV"
and this
remote button TV Brand Press "TV"
and this
remote button
Hitachi 1 Gold star 1 6 Panasonic 1
CH
Zenith 2 Toshiba 7 Mitsubishi
CH
Sony 3 Gold star 2 8 JVC 100/ENT
Magnavox 4 Panasonic 2 9 Sharp 1 VOL (UP)
Sanyo 5 RCA 0 Sharp 2 AVX
Hitachi 2 DISPLAY
Note: If your TV brand is not listed on the Set-Up Chart, try all the buttons listed in the chart until the TV changes
channels. If the TV channel does not change, you won't be able to program the remote for your TV.
Using the VCR remote to control your TV
1 Press the "TV" button on remote control.
2 Point VCR remote control toward TV.
3 Press buttons corresponding the functions available on your TV remote control.