Operating in the remote control, Cassette tapes – Hitachi VT-FX6411A User Manual

Page 11

Advertising
background image

CASSETTE TAPES

- 11 -

Hold for 10 Seconds

2 Install batteries.
• Align the positive (+) and negative (-) polarity marks on the batteries with those indicated on
the remote control.

3 Replace the lid.

Operating in the remote control

Operating the VCR:

1 Make sure there is no obstacle between the remote control and VCR's infrared receiver.

Note:

You cannot operate the VCR if there is an obstacle (for example, coffee table, sofa, etc) between the VCR

and remote control.

2 Point the remote control at the VCR's infrared receiver and press the required button
on the remote control.

Note:

If the remote does not work even at close range, try replacing the batteries with two fresh "AA" batteries.

CASSETTE TAPES

Advertising
This manual is related to the following products: