Hitachi VT-FX6411A - Manual (Page 53)

INSTANT RECORDING TIMER - 53 -
5 Press the and cursor button to set the SAP option to "ON".
6 Press the GUIDE button to end the setting.
7 Follow the Step 1 through 6 on "Basic Recording Steps" on pages 35 and 36.
Stereo vs. mono sound
When you select the STEREO option in the initial setup operation, your VCR records in stereo any station that
broadcasts stereo sounds. When a TV channel broadcasts in stereo, you'll see a stereo indicator on the TV
screen.
Set to MONO if the stereo signal is weak and the sound is too "noisy".
Note: When you select MONO, sound is recorded as mono even when a channel broadcasts in stereo.
INSTANT RECORDING TIMER
Using the Instant Recording Timer (IRT)
The Instant Recording Timer (REC/IRT button on the VCR) will let you make a simplified timer recording without
having to use the programming timer. In order to set the IRT properly the clock must be set before starting.
1 Follow the steps 1 through 5 on "Basic recording steps" on pages 35 and 36.
2 Press the REC/IRT button twice to indicate the recording time on the display.
• You may increase the recording time by 30 minutes each time you press the REC/IRT button.
• While you are recording, the remaining recording time is shown on the VCR display.
• At the end of your recording, the display will read "0:00", recording will stop automatically, and the VCR will turn