Hitachi VT-FX6411A - Manual (Page 73)

PROGRAMMING THE VCR REMOTE CONTROL TO CONTROL YOUR CABLE BOX - 73 -
2 Point VCR remote control toward cable box
3 Press and hold the "CATV" button.
4 Press the number button corresponding to your cable box as shown in the set-up chart. The cable box
channel will change to confirm that the remote control has been set.
Cable Box Press "CATV"
and this
number button
Cable Box Press "CATV"
and this
number button
Jerrold 1 1 Zenith 5
Jerrold 2 2 Scientific
Atlanta 6
Jerrold 3 3 Pioneer 7
Hamlin 4 Philips 8
Note: If your cable box is not listed on the Set-Up Chart, try all the buttons listed in the chart until the cable box
changes channels. If the cable box channel does not change, you won't be able to program the remote for your
cable box.