Harman-Kardon AVR45 - Manual (Page 11)

Front Panel Information Display
A Mute: This indicator illuminates
to remind you that the AVR45’s out-
put has been silenced by pressing
the
Mute button Û d. Press the
Mute button again to return to the
previously selected output level.
B Bypass: This indicator illumi-
nates when the surround processing
has been disabled by pressing the
Surround Off button Ú. When this
indicator is lit, the AVR45 will play tra-
ditional stereo sound using the front
left and front right speakers only.
C Analog: This indicator illuminates
when an analog input source is in use.
D Dolby Digital Indicator: This
indicator illuminates when a Dolby
Digital source is being played.
E Optical Source: This indicator
illuminates when a digital source
is in use via a connection to the
Optical Digital input ·.
F Analog Dolby Surround Mode
Indicators: These indicators illumi-
nate when one of the analog (matrix)
Dolby Surround modes is in use.
G Coax Source: This indicator illu-
minates when a digital source is in
use via a connection to the
Coaxial
Digital input °.
H AC-3* Indicator: This indicator
illuminates when the AVR45 is
decoding a Dolby Digital input
source.
I PCM Indicator: This indicator
illuminates to show that a standard
PCM (SP/DIF) digital audio signal
is being decoded by the digital-to-
analog converter.
J Analog Surround Mode
Indicators: These indicators illumi-
nate when one of the DSP generated
analog surround modes is in use
with an analog input source.
K Night Indicator: This indicator
lights when the AVR45 is in the Night
mode, which prevents the AVR45
from loud playback when digital
sources are in use.
L Preset Number: This two-digit
display indicates the station preset
number that is currently in use, or
that is being entered.
M Preset Indicator: This indicator
illuminates when one of the stations
entered into the preset memory is
tuned. The number that appears
below the indicator is the preset
station’s memory.
N Memory: This indicator flashes
when entering presets and other
information into the tuner’s memory.
O Auto: This indicator illuminates
when the “Auto” mode is in use for
FM tuning.
P Stereo Indicator: This indicator
illuminates when an FM station is
being tuned in stereo.
Q Mono Indicator: This indicator
illuminates when the tuner has been
placed in the monaural mode by
pressing the
Tune Mode button *.
Set the tuner for mono listening to
cut noise and improve the quality of
distant stereo signals.
R Tuned Indicator: This indicator
illuminates when a station is being
received with sufficient signal
strength to allow for acceptable
listening quality.
S Main Information Display: This
display shows messages relating to
the status, input source, surround
mode, tuner, volume level or other
aspects of unit’s operation.
T Sleep Indicator: This indicator is
illuminated when the Sleep function
is in use. The number that appears
above the indicator is the number of
minutes remaining before the AVR45
will return to the Standby mode.
8
AVR45 om (G).Eng,Fr 4/16/99 11:41 AM Page 8