Operation, Basic operation, Source selection – Harman-Kardon AVR45 User Manual

Page 25: Surround mode selection

Advertising
background image

Operation

Basic Operation

Once you have completed the setup and
configuration of your new receiver, it is
simple to operate and enjoy. The follow-
ing instructions will provide the steps
needed to enjoy the AVR45:

• When using the AVR45 for the first
time, it is necessary to press the

Main

Power

button

1

on the front panel to

turn the unit on. This places the unit in a
standby mode, as indicated by the amber
color of the

Power Indicator

3

. Once

the unit is in standby, you may begin a
listening session by pressing the

System

Power Control

2

on the front panel or

the

Power

button

c

on the remote.

Note that the

Power Indicator

3

will

turn green. This will turn the unit on and
return it to the input source that was last
used. The unit may also be turned on
from standby by pressing any of the

Source Selector

buttons on the remote

k

or front panel

9 ) ! @ # $

.

To turn the unit off at the end of a listen-
ing session simply press the

System

Power Control

2

on the front panel

or the

Power

button

c

on the remote.

Power to any equipment plugged into
the rear panel

Switched AC Outlet

› will be shut off and the

Power

Indicator

3

will turn amber.

When the remote is used to turn the unit
“off” it is actually placing the system in a
standby mode, as indicated by the amber
color of the

Power Indicator

3

.

When you will be away from home for
an extended period of time it is always
a good idea to completely turn the

unit off using the front panel

Main

Power Switch

1

. Note that all preset

memories are lost if the unit is left
turned off with the

Main Power

Switch

1

for more than two weeks.

Source Selection

• To select a source at any time, press
any of the

Source Selector

buttons on

the remote

k

or front panel

9 ) !

@ # $

.

• The front panel

Video 3 Inputs

8

may be used to connect a device such as
a video game or camcorder to your home
entertainment system on a temporary
basis.

• When an audio source is selected the
last video input used remains routed to
the

Video Outputs 1

¢

and

TV

Monitor Output

. This permits

simultaneous viewing and listening to
different sources.

• During a listening session you may
wish to adjust the

Bass

5

and

Treble

6

controls to suit your listening tastes.

• Adjust the volume to a comfortable
level using the front panel

Volume

Control

Ù

or remote

Volume

Up/Down

z

buttons.

• To temporarily silence all speaker
outputs press the

Mute

button

d Û

.

This will cut the output to all speakers,
but it will not effect any recording or
dubbing that may be in progress. When
the system is muted the

MUTE

indicator

A

will light in the

Information

Display

˝

. Press the

Mute

button

d

Û

again to return to normal operation.

• For private listening, plug the

1

/

4

"

stereo phone plug from a pair of stereo
headphones into the front panel

Headphone

jack

4

.

• When a Video Input source is selected
the video signal for that input will be
routed to the

TV Monitor Video Output

jack

and will be viewable on a TV mon-

itor connected to the AVR45. Make certain
that your TV is set to the proper input to
view the signal.

• To program the AVR45 for automatic
turn off, press the

Sleep

button

`

on

the remote. Each press of the button will
increase the time before shut down in the
following sequence:

The sleep time will be displayed in the
Information Display and it will count
down until the time has elapsed.

When the programmed time has elapsed
the unit will automatically turn off. Note
that the front panel display will dim to
one half brightness when the Sleep func-
tion is programmed. To cancel the Sleep
function, press the

Sleep

button

`

until the information display returns to
normal brightness and the Sleep
indicator numbers disappear.

Surround Mode Selection

One of the most important features of
the AVR45 is its ability to reproduce a full
multichannel surround sound field from
Dolby Digital sources, analog matrix
surround encoded programs and stan-
dard stereo programs. In all a total of
seven listening modes are available on
the AVR45.

90

min

80

min

70

min

60

min

50

min

40

min

30

min

20

min

10

min

5

min

1

min

OFF

22

AVR45 om (G).Eng,Fr 4/16/99 11:41 AM Page 22

Advertising