HONDA Outboard Motor BF90A - Manual (Page 103)

101
TAKING CARE OF UNEXPECTED PROBLEMS
Correction Possible Cause ENGINE WILL NOT START
Check emergency stop switch
clip.
Check control positions.
Clip not inserted in stop switch.
Gearshift lever or control lever not
in neutral position.
Choke OPEN (tiller-handle type).
Throttle grip not in START
position (tiller-handle type).
Shift to neutral (p. and
).
Pull choke knob to CLOSED
position, unless engine is warm (p.
).
Turn throttle grip to START
position (p.
).
Raise choke and fast idle lever,
unless engine is warm (p.
).
Hold choke switch in the ON
position, unless engine is warm (p.
).
Move control lever to fast idle
position, unless engine is warm (p.
and ).
Insert clip in stop switch.
Choke and fast idle lever not
raised (side-mount type).
Choke switch OFF (panel-mount
and top-mount types).
Control lever not open at least 30
50% (panel-mount and top-
mount types).
1.
2. 19, 23, 26
29
18
45
22
31
28 25
03/03/24 17:01:30 31ZW0601_102