Hitachi GH 300 - Manual (Page 19)

Displacement Pump ProConnect
311797F 19
8. (Fig. 18) Open clamp (247).
F IG . 18
9. (Fig. 19) Remove pump (111) from unit.
F IG . 19
Installation
1. (Fig. 20) If needed, place pump rod in adjustment casting
and pull pump to lengthen rod.
F IG . 20
2. (Fig. 21) Install pump (111) in sprayer.
F IG . 21
3. (Fig. 22) Close clamp (247) around pump (111) and push it
closed.
F IG . 22
NOTE: Closing force on T-handle can be adjusted if needed by
inserting pin into adjustment hole and turning.
CAUTION
Support pump with your hand before opening t-handle.
ti8833a
ti8832a
111
ti8834a
111
ti8959a
247
ti8958a
Adjustment hole