haier PH-4210D User Manual
Page 16
16 Plasma TV
Turning on the TV just after installation.
1
. Connect power cord correctly to the television.
2.
Press the SWITCH button on back of the TV. The TV is powered up and set in to standby mode.
Press the POWER button on the remote control or button on the TV and then the TV will turn on.
1
. If the TV was turned off with the SWITCH button on the TV
Press the SWITCH button on the TV to turn the TV on.
2
. If the TV was turned off with the remote control and then the ON/OFF switch on the back of the TV.
Press the SWITCH button on the back of TV and then press the POWER button on the remote control to turn
the TV on.
NOTE
If the unit is not used for an extended period, disconnect the power plug from the wall power outlet.
TV
Turning on the TV
Choose the Menu Language
When you start using your set for the first time, you must select the Menu Language which will be used for displaying
menus and indications.
Menu Language English
OSD Timeout 15seconds
Menu Background Translucent
Calendar
Auto Off Off
BlueScreen Off
Close Caption Off
Parental
B
C
A
1
Press MENU and then use VOL+/- button to select the
FUN. Menu.
2
Press CH+/-button to select Menu Language.
3
Select a particular Menu Language by pressing VOL+/- button
repeatedly. You can choose one of three Menu Languages.
(English, French, Spanish)
4
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
Choose the Input Source
- This changes the picture source so that you can watch your TV, cable TV, VCR, DVD, or any other devices that
are connected to your TV.
1. Press INPUT button on the remote control and the Scoure menu will appear on the screen.
2. Press CH+/-button for each option and then press VOL+/- button to confirm.
Note:
If AV1 and S-Video are inserted at the same time, priority will be given to S-Video.
Source
TV
AV1/S-Video
YPbPr/YCbCr
VGA
DVI
In this manual, the OSD (On Screen Display) may be vary from what is dispayed on your set.
What is shown in this manual is an example to help you with the operartion of your set.