haier PH-4210D User Manual
Page 29
- RGB (PC) mode only; This function doesn`t work in RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV may need further adjustment.
- The Auto sync
is
not active in DVI mode.
1
. Press MENU button and then use VOL+/- button to select the ADJ.
Menu.
2
. Press CH+/-
button to select Auto Sync
.
3
. Press VOL+/- button to run Auto Sync.
When Auto Sync
has finished, a better quality image should be shown on screen.
If the position of the image is still not correct, try Auto adjustment again.
4
. In RGB (PC) mode, if the image needs to be adjusted more after using
Auto
Sync
, you can try Auto Sync again.
Note
: Use Reset instead of Auto sync in 480P,720P,1080i.
Press the ARC button repeatedly to select the desired picture format.
4:3 mode
Choose 4:3 mode when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the
left and right sides.
Full screen( correspond with 16:9)
Choose Full screen when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
Vertical Zoom
Choose Vertical Zoom when you want to adjust the picture the picture vertically, that is without any back bars.
Note:
The setting of aspect ratio is respective of each different signal source , that means different aspect ratios can be saved
in each different source
- Caution: If a 4:3 or one to one fixed image is on the screen for a long time, it may remain visible. This is called burn-in.
- Set every aspect ratio for Video, Component 480i sources.
- Use 4:3, or 16:9 for other RGB-PC and DVI-PC sources.
- Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.
- This function works in the following modes:
RGB-PC, RGB-DTV (480p,720p,1080i), DVI-DTV (480p,720p,1080i), COMPONENT(480p,720p,1080i).
1. Press MENU button and then use VOL+/- button to select the ADJ. Menu.
2. Press CH+/- button to select Adjust.
3. Press VOL+/- button or enter button to enter the sub menu.
4. Press CH+/- button to select one option and then press VOL+/- to adjust.
5. Press MENU or EXIT to exit it.
Display Mode Full screen
Reset
Color Temper. Standard
Black Stretch On
Adjust
RGB
Auto Sync
.
B
C
A
Owner s Manual 29