Huffy NCS102 - Manual (Page 25)

03/04 P/N 21447702
25
SECTION F: NET INSTALLATION
1. Install clips.
CLIP “ARM”
CLIP “BODY”
Insert one “arm” of clip into ram as shown. Twist “body” of
clip slightly so that second “arm” slides over the top of the
first “arm” as shown.
Push in direction indicated by arrows.
Push second “arm” back and into ram as shown.
Twist “body” of clip slightly again to spread “arms” of clip.
Clip “arms” must be flat and touching edge to edge as
shown, not overlapping.
A A
B B
C C
40
57
USE OF THIS PRODUCT
WITHOUT PROPER
INSTALLATION OF SMART
CLIPS
® , OR WHEN ALL SMART
CLIPS ® ARE NOT PRESENT
COULD RESULT IN BODILY
HARM. BE SURE TO FOLLOW
DIRECTIONS CAREFULLY.
WARNING!