Hama VPL-CX86 - Manual (Page 13)

C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm masterpage: Right
13
Wireless Connection
VPL-CX86/CX76
2-634-400-11 (1)
Setting each mode
In the initial display of the Air Shot 2 setting menu, the left edge of the mode currently used is
displayed in light blue. You can switch the mode to be used and change the mode name and
settings.
x Displaying the setting items menu (action menu)
The status appears in the right pane of the window.
Press the ENTER key to display the setting item menu (action menu).
x Displaying the mode status
When you select [Status] from the action menu, the status of the mode being used is displayed.
The status of each item appears in the right pane of the window.
Simple Mode Wireless Network
Network Mode:
Network Name(SSID):
Network Authentication:
Data Encryption:
802.1x Authentication:
Internet Protocol(IP)
IP Address Setting:
IP Address:
Subnet Mask:
Default Gateway:
Ad-hoc(Peer-to-peer)
AIRSHOT1000014
Open
WEP
Disable
Auto
Manual Mode1
Manual Mode2
Manual Mode3
Manual Mode4
Manual Mode5
System Setup
Exit
Air Shot
Close
Select
Status
Setup
Rename
Items Functions
Close Closes the action menu.
Select Sets the selected mode effective.
Status (only for the mode
being used) Displays the status of the mode currently used.
Setup Displays the [Network Setting] window to change the mode
settings.
Rename (Manual Mode only) Renames the mode. You can input the maximum of 16 characters/
numbers.
Items Display contents
Internet Protocol(IP) Displays [IP Address Setting (Manual/Auto)], [IP Address],
[Subnet Mask], [Default Gateway], [Primary DNS], [Secondary
DNS], [DHCP Server], and [Lease Obtained]/[Lease Expires].
Wireless Network Displays [Network Mode], [Network Name(SSID)], [Channel],
and [Received Level] (1% to 100%).
Connection Log Displays the connection log.
Card Information Displays the [Manufacture], [Card Name], and [Wireless
Standard] (802.11b, 802.11b/g), [MAC Address], [WPA Support]
of the wireless LAN card being used.
Close Closes the [Network Status] window.