Hama VPL-CX86 - Manual (Page 15)

C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm masterpage: Right
15
Wireless Connection
VPL-CX86/CX76
2-634-400-11 (1)
Key* When WEP is used for [Data Encryption], enter the WEP
key.
Enter the same key as that of the computer or access point.
The number of the characters/figures
• In case 64(40)bit ASCII: 5 characters/numbers/symbols
• In case 128(104)bit ASCII: 13 characters/numbers/
symbols
• In case 64(40)bit HEX: 10 numbers from 0 to 9/characters
from a to f
• In case 128(104)bit HEX: 26 numbers from 0 to 9/
characters from a to f
When [64(40)bit ASCII] or [128(104)bit ASCII] is selected, the
capital and small letters are discriminated.
When WPA-PSK is used for [Network Authentication],
enter the key. Enter the same key as that of the access point.
The number of the characters/figures
• In case ASCII: 8 to 63 characters/numbers/symbols
• In case HEX: 64 numbers from 0 to 9/characters from a to
f
Channel When [Ad-hoc(Peer-to-peer)] is selected in [Network
Mode], you can select from 1 to 11.
When [Wireless Access Point] is selected in [Network
Mode], [Auto] is selected automatically.
• If the USB wireless LAN module is connected to the computer,
remove it before setting.
• You may not be able to use some channel according to the
country/region.
802.1x Authentication* Enable or disable [802.1x Authentication] and specify [User
Name] and [Password].
802.1x Authentication Select [Enable] or [Disable] for the 802.1x Authentication
function.
EAP Type The encryption system for the [802.1x Authentication] is
fixed to [PEAP (MS-CHAP v2)].
User Name Enters the user name for authentication. (the maximum of
64 characters/numbers/symbols)
Password Enter the password for authentication. (the maximum of 64
characters/numbers/symbols)
Items Functions
Note
Notes