Hama VPL-CX86 - Manual (Page 20)

C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm masterpage: Left
20
Setting/Operating via Web
VPL-CX86/CX76
2-634-400-11 (1)
After access, the following display appears.
Click [Information].
You can confirm the current state of the
projector on the computer. You cannot
change the settings of the projector.
Click [Control].
You can control the projector on the
computer. The functions of each button
provide the same functions the button of the
identical name.
Click [Air Shot].
You can switch the mode and set each mode.
To switch the model, select the desired mode
button and then click [Select].
To set each mode, select the desired mode
button and then click [Setup] to display the
Setup display of the mode.
Click the [Apply] button to reflect the
projector.
Confirming the State of
Projector Settings
(Information)
Operating the Projector on
the Computer (Control)
Setting the Connecting Mode
(In case of VPL-CX86)