Hitachi SCANJET N9120 User Manual
Page 43
7. Close the inner ADF access door, and then close the scanner lid.
8. At the scan destination, examine the scan output to determine which page was the
last to be completely scanned.
9. Reload the unscanned pages in the ADF input tray. If any pages are damaged, do
one of the following:
•
Photocopy the damaged page, and then add the photocopy to the input stack.
•
Scan the damaged page from the scanner glass.
•
Reprint the original document.
Prepare the stack as follows:
a. Fan the stack of document pages to ensure that the pages do not stick together.
Fan the edge that will be pointing into the feeder in one direction, and then fan
that same edge in the opposite direction.
b. Align the edges of the documents by tapping the bottom of the stack against the
table top. Rotate the stack 90 degrees and repeat.
10. Resume scanning.
Automatic document feeder problems
41