Hitachi SCANJET N9120 - Manual (Page 8)

Weight: 49–120 g/m 2 (13–32 lb)
NOTE: In the scanning software, set the page size to match the width and length
of the paper that you are scanning.
• Scanning the following types of documents might result in paper jams or damage to
the documents. To scan these documents, make a photocopy, and then scan the
copy instead.
Wrinkled or creased
documents Curled documents
Torn documents Documents with paper
clips or staples
Carbon paper Coated paper
Extremely thin,
translucent paper Paper with adhesive
notes or flags attached
Photos Overhead
transparencies
Papers that are stuck
together Paper with wet
substances such as
glue or correction fluid
• Before loading documents, make sure that the ADF access doors are securely
latched.
• When loading a stack of documents, make sure that all of the documents are the
same size.
• The maximum capacity of the ADF is 200 sheets of 75 g/m 2 (20 lb) paper. When using
heavier paper, the maximum capacity is decreased. Use the fill line, shown below, as
a guide for the maximum height of the document stack.
Chapter 1
6 Use the scanner