Honeywell RTH6350 User Manual
Page 17
Advertising
RTH6350/RTH6450 Series
15 69-2416ES—05
SETUP
WIRING
ASSIST
ANCE
TROUBLESHOOTING
Function 2:
Heat pump changeover valve
Done
Next
2
0
M28352
Press the
s
or
t
button to select whether your
changeover valve is used in heating or cooling:
NOTE: If Function 2 does not appear, please turn to the
next page to continue.
0
Cooling changeover valve: Use this setting if
you connected a wire labeled “O” to the O/B wire
terminal (see page 21).
1
Heating changeover valve: Use this setting if
you connected a wire labeled “B” to the O/B wire
terminal (see page 21).
M28351
Press to change setting.
When correct setting is
selected, press
NEXT to
display next function.
Advertising
This manual is related to the following products: