Т³гж 6, Operation with the remote control unit(continued) – Hisense Group KFR-3208GW User Manual
Page 11
Operation with the Remote Control Unit(continued)
NOTE
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is
in the ON position.
If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described
below and change the settings as desired.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Press the MODE selector button and select the desired mode.
For heating operation
For dehumidifying operation
For cooling operation
For automatic operation
For fan operation
A
To start the air conditioner, press the ON/OFF operation button.
Press the TEMP setting button to change the temperature setting to the desired temperature .
Adjustable temperature range:
30
max. 16
min.
!
NOTE
Set the FAN SPEED selector button to choose the fan speed you want.
If the fan speed is set to (Automatic), the fan speed switches automatically,
according to the difference between the actual room temperature and the set temperature.
A
Press the FLAP button and set the airflow direction as desired.
To stop the air conditioner, press the ON/OFF operation button again.
9
STEP 4
STEP 1
C
A
A
1 HR
TEMP
FAN
SPEED
H
.P
.
O
N
/O
FF
FLAP
MODE
ON
OFF
SLEEP
SET
CANCEL
ACL
A/C SENSOR
STEP 3
STEP 2
STEP 5