Hisense Group KFR-3208GW - Manual (Page 14)

Using the 12-Hour ON and OFF Timer
After the length of time set for TIMER ON elapses, the unit begins operating.
The display depicted at left indicates that the air conditioner will begin operating in
three hours.
Setting Procedures:
STEP 1 Press the MODE button and set the desired operation mode and
press the ON/OFF operation button.
STEP 2 Press the timer ON button to set the time at which you want
operation to begin. The time can be set for one to twelve hours,
in one hour steps.
1 2 3....... 12
STEP 3 Press the timer SET button (which advances the time displayed).
The display changes immediately to its status previous to timer setting, but the
indication remains.
To check the status of the timer while it is counting down, press the timer SET
button .
Cancellation procedure: Press the CANCEL button once again.
12
After the length of time set for TIMER OFF elapses, the unit stops operating.
The display depicted at left indicates that the air conditioner will stop operating in
five hours.
Setting Procedure:
STEP 1 Press the timer OFF button to set the time at which you want
operation to stop.
The time can be set for one to twelve hours, in one hour steps.
STEP 2
1 2 3....... 12
Press the timer SET button (which advances the time displayed).
The display changes immediately to its status previous to timer setting, but the
indication remains.
To check the status of the timer while it is counting down, press the timer SET
button .
Cancellation procedure: Press the CANCEL button once again.
2.TIMER OFF mode
(Example)
STEP 2
STEP 1
C
1 HR TEMP
FAN
SPEED
H
.P
.
O
N/
O
FF
FLAP MODE
ON OFF
SLEEP SET CANCEL
ACL A/C SENSOR
HOUR HOUR
STEP 2
STEP 3
STEP 1
1.TIMER ON mode
(Example)
C
1 HR TEMP
FAN
SPEED
H
.P
.
O
N/
O
FF
FLAP MODE
ON OFF
SLEEP SET CANCEL
ACL A/C SENSOR
HOUR HOUR
A
A