Data pools, Differential management lus (dm-lu), Consistency group (ctg) – Hitachi MK-97DF8018-00 User Manual

Page 18: Snapshot interface—storage navigator modular 2, Data pools -6, Differential management lus (dm-lu) -6, Consistency group (ctg) -6, Snapshot interface—storage navigator modular 2 -6

Advertising
background image

1–6

SnapShot Overview

Hitachi Simple Modular Storage Copy-on-Write SnapShot User’s Guide

Data Pools

After a snapshot, the V-VOL maintains a static copy of the P-VOL even as

new writes are updating the P-VOL. To do this, before an updated block is

written to the P-VOL, SnapShot sends the data that is being replaced to the

data pool. Pointers in the V-VOL are updated to locate the replaced data that

is now located in the data pool, thus maintaining the V-VOL point-in-time

image of the P-VOL.

The data pool’s function in the SnapShot process is illustrated in

Figure 1-2

.

Up to 64 data pools can be set for each controller. Each data pool can be

assigned to two or more P-VOLs plus the differential data of two or more V-

VOLs.

Differential Management LUs (DM-LU)

The DM-LU is an exclusive volume used for storing SnapShot information

when the array system is powered down. The DM-LU is treated the same as

other volumes in the storage system, but is hidden from a host. The DM-LU

is set at the factory at 10 GB. User configuration is not required

Consistency Group (CTG)

Application data often spans more than one volume. With SnapShot, it is

possible to manage operations spanning multiple volumes as a single group.

In a “consistency group” (CTG), all primary logical volumes are treated as

a single entity.

Managing SnapShot primary volumes as a consistency group allows

multiple operations to be performed on grouped volumes concurrently.

Write order is guaranteed across application logical volumes, since

snapshots can be taken at the same time.

SnapShot Interface—Storage Navigator Modular 2

Use Storage Navigator Modular 2 (Navigator 2) on the workstation to

perform SnapShot tasks. Configure, operate, and monitor SnapShot

functions with either of two interfaces: a graphical user interface (GUI) or a

Command Line Interface (CLI). Instructions in this guide refer to both

interfaces.

CAUTION! Storage Navigator 2 CLI is provided for users with significant

storage management expertise. Improper use of this CLI could void your

Hitachi Simple Modular Storage 100 system warranty. Please consult with

your reseller before using CLI.

Advertising