Honeywell RCT8100 - Manual (Page 7)

RCT8100 Programmable Thermostat
5
1) Remove coverplate.
2) Loosen screw (the
screw remains
captive on wallplate).
3) Remove thermostat.
4) Mark and drill
appropriate mounting
holes (or use existing
holes). Insert plastic
anchors. Pass wires
through opening of
wallplate and secure
wallplate to the wall
using provided
screws.
q
Mount New Wallplate 4.
Labels don’t match?
If a wire does not match any terminal on the thermostat,
see next page.
400-147-042-A (69-2336ES-01 RCT8100 TH147P Quick Installation Guide) ENG.fm Page 5 Thursday, October 1, 2009 10:36 AM