Honeywell RCT8100 - Manual (Page 9)

RCT8100 Programmable Thermostat
7
If a labeled wire does not match any terminal
designation, see diagram below.
Do not use C, X or B. Wrap bare end of wire
with electrical tape.
If wires are connected to both Rh and Rc
terminals, remove jumper (see previous
page).
s
Connect Wires (less common wiring)
400-147-042-A (69-2336ES-01 RCT8100 TH147P Quick Installation Guide) ENG.fm Page 7 Thursday, October 1, 2009 10:36 AM