Document Outline

• Software Reference for x310 Series Switches
  • Acknowledgments
    • Getting the most from this manual
  • Table of Contents
  • Part 1: Setting up the Switch
    • Chapter 1: Getting Started
      • Introduction
      • How to Login
      • How to get Command Help
        • Viewing a List of Valid Parameters
        • Completing Keywords
        • Viewing Command Error Messages
      • How to Work with Command Modes
        • Entering Privileged Exec Commands When in a Configuration Mode
      • How to See the Current Configuration
      • Default Settings
      • The Default Configuration
      • How to Change the Password
      • How to Set Strong Passwords
      • How to Set an IP Address on VLAN 1
      • How to Save and Boot from the Current Configuration
        • How to Save to the Default Configuration File
        • How to Create and Use a New Configuration File
      • How to Return to the Factory Defaults
      • How to See System Information
        • Viewing Overall System Information
        • Viewing Temperature, Voltage, and Fan Status
        • Viewing the Serial Number
      • How to Set System Parameters
        • How to Change the Telnet Session Timeout
        • How to Name the Switch
        • How to Display a Text Banner at Login
      • How to Set the Time and Date
        • How to Show Current Settings
        • How to Set the Time and Date
        • How to Set the Timezone
        • How to Configure Summer-time
      • How to Add and Remove Users
        • Pre-encrypted Passwords
      • How to Undo Settings
        • How to Use the no Parameter
        • How to Use the default Parameter
      • How to Upgrade the Firmware
      • Save Power With the Eco-Friendly Feature
        • Eco-Friendly
      • Trouble-shoot fiber and pluggable issues
      • Using the Find Me feature
      • Continuous Reboot Prevention
      • Controlling “show” Command Output
    • Chapter 2: Command Syntax Conventions in this Software Reference
    • Chapter 3: Start-up Sequence
      • AlliedWare Plus Start-up
      • Diagnostic Menu
      • Bootloader Menu
      • Start-up Sequence
    • Chapter 4: CLI Navigation Commands
      • Command List
      • configure terminal
      • disable (Privileged Exec mode)
      • do
      • enable (Privileged Exec mode)
      • end
      • exit
      • help
      • logout
      • show history
    • Chapter 5: User Access Commands
      • Introduction
      • Command List
      • clear line console
      • clear line vty
      • enable password
        • Using Plain Passwords
        • Using Encrypted Passwords
        • Using Hidden Passwords
      • enable secret
        • Using Plain Passwords
        • Using Encrypted Passwords
        • Using Hidden Passwords
      • exec-timeout
      • flowcontrol hardware (asyn/console)
      • length (asyn)
      • line
      • privilege level
      • security-password history
      • security-password forced-change
      • security-password lifetime
      • security-password minimum-categories
      • security-password minimum-length
      • security-password reject-expired-pwd
      • security-password warning
      • service advanced-vty
      • service http
      • service password-encryption
      • service telnet
      • service terminal-length
      • show security-password configuration
      • show security-password user
      • show privilege
      • show telnet
      • show users
      • telnet
      • telnet server
      • terminal length
      • terminal resize
      • username
    • Chapter 6: Creating and Managing Files
      • Introduction
      • USB support
      • Working With Files
        • Listing files
          • Listing files including hidden system files
          • Seeing information about the filesystem
          • Listing files in a subdirectory
          • Listing files in NVS memory or on a USB storage device
        • Displaying the contents of configuration and text files
        • Navigating through the filesystem
          • Showing the current directory
          • Changing directories
          • Changing to a directory in NVS memory or on a USB storage device
          • Creating new directories
          • Deleting directories
        • Using the editor
      • Creating and Using Configuration Files
        • Creating a configuration file
        • Specifying the start-up configuration script
        • Working with configuration files
        • The configuration file fallback order
      • Copying Files To and From Your Device
        • URL syntax
        • Copying files
          • Copying within a filesystem
          • Copying to and from NVS or USB storage device
          • Copying with ZMODEM
          • Copying with Hypertext Transfer Protocol (HTTP)
          • Copying with Trivial File Transfer Protocol (TFTP)
          • Copying with Secure Copy (SCP)
          • Copying with SSH File Transfer Protocol (SFTP)
        • Copying from a Server to Running Configuration
      • The Autoboot Feature
        • Restoring a switch using Autoboot from external media
        • Configure Autoboot
    • Chapter 7: File Management Commands
      • Introduction
        • URL Syntax and Keyword Usage
      • Command List
      • autoboot enable
      • boot config-file
      • boot config-file backup
      • boot system
      • boot system backup
      • cd
      • copy current-software
      • copy debug
      • copy running-config
      • copy startup-config
      • copy (URL)
      • copy zmodem
      • create autoboot
      • delete
      • delete debug
      • dir
      • edit
      • edit (URL)
      • erase startup-config
      • mkdir
      • move
      • move debug
      • pwd
      • rmdir
      • show autoboot
      • show boot
      • show file
      • show file systems
      • show running-config
      • show running-config access-list
      • show running-config as-path access-list
      • show running-config dhcp
      • show running-config full
      • show running-config interface
      • show running-config ip route
      • show running-config ipv6 access-list
      • show running-config ipv6 route
      • show running-config key chain
      • show running-config lldp
      • show running-config power-inline
      • show running-config route-map
      • show running-config router
      • show running-config router-id
      • show running-config security-password
      • show startup-config
      • show version
      • write file
      • write memory
      • write terminal
    • Chapter 8: System Configuration and Monitoring Commands
      • Command List
      • banner exec
      • banner login (system)
      • banner motd
      • clock set
      • clock summer-time date
      • clock summer-time recurring
      • clock timezone
      • continuous-reboot-prevention
      • ecofriendly led
      • ecofriendly lpi
      • findme
      • hostname
      • max-fib-routes
      • max-static-routes
      • no debug all
      • reboot
      • reload
      • show clock
      • show continuous-reboot-prevention
      • show cpu
      • show cpu history
      • show debugging
      • show ecofriendly
      • show interface memory
      • show memory
      • show memory allocations
      • show memory history
      • show memory pools
      • show memory shared
      • show process
      • show reboot history
      • show router-id
      • show system
      • show system environment
      • show system interrupts
    • Chapter 9: Debugging and Logging
      • Introduction
      • Debugging
        • Logging to terminal
        • Turning off debugging
      • Logging
        • Log Outputs
    • Chapter 10: Logging Commands
      • Command List
      • clear exception log
      • clear log
      • clear log buffered
      • clear log permanent
      • default log buffered
      • default log console
      • default log email
      • default log host
      • default log monitor
      • default log permanent
      • log buffered
      • log buffered (filter)
      • log buffered size
      • log console
      • log console (filter)
      • log email
      • log email (filter)
      • log email time
      • log host
      • log host (filter)
      • log host time
      • log monitor (filter)
      • log permanent
      • log permanent (filter)
      • log permanent size
      • log-rate-limit nsm
      • show counter log
      • show exception log
      • show log
      • show log config
      • show log permanent
      • show running-config log
    • Chapter 11: Scripting Commands
      • Command List
      • activate
      • echo
      • wait
    • Chapter 12: Interface Commands
      • Command List
      • description (interface)
      • interface (to configure)
      • mru
      • mtu
      • show interface
      • show interface brief
      • show interface status
      • shutdown
    • Chapter 13: Interface Testing Commands
      • Command List
      • clear test interface
      • service test
      • test interface
  • Part 2: Layer Two Switching
    • Chapter 14: Switching Introduction
      • Introduction
      • Physical Layer Information
        • Switch Ports
          • Port Numbering
          • Port ranges
        • Activating and Deactivating Switch Ports
        • Autonegotiation
        • Duplex mode
        • Speed options
          • Configuring the port speed
        • MDI/MDIX Connection Modes
      • The Layer 2 Switching Process
        • The Ingress Rules
          • Access Mode
          • Trunk Mode
        • The Learning Process
        • The Forwarding Process
        • The Egress Rules
      • Layer 2 Filtering
        • Ingress Filtering
      • Storm control
      • Loop Protection
        • Loop Detection
          • Introduction
          • Operation
          • Configuration
        • Thrash Limiting
      • Support for Jumbo Frames
      • Port Mirroring
      • Port Security
        • IEEE 802.1X
      • Quality of Service
      • IGMP Snooping
    • Chapter 15: Switching Commands
      • Command List
      • backpressure
      • clear loop-protection counters
      • clear mac address-table static
      • clear mac address-table dynamic
      • clear port counter
      • debug loopprot
      • debug platform packet
      • duplex
      • flowcontrol (switch port)
      • linkflap action
      • loop-protection
      • loop-protection action
      • loop-protection timeout
      • mac address-table acquire
      • mac address-table ageing-time
      • mac address-table static
      • mac address-table thrash-limit
      • mirror interface
      • platform hwfilter-size
      • platform load-balancing
      • platform stop-unreg-mc-flooding
      • polarity
      • show debugging loopprot
      • show debugging platform packet
      • show flowcontrol interface
      • show interface switchport
      • show loop-protection
      • show mac address-table
      • show mac address-table thrash-limit
      • show mirror
      • show mirror interface
      • show platform
      • show platform classifier statistics utilization brief
      • show platform port
      • show port-security interface
      • show port-security intrusion
      • show storm-control
      • speed
      • storm-control level
      • thrash-limiting
      • undebug platform packet
      • undebug loopprot
    • Chapter 16: VLAN Introduction
      • Introduction
      • Virtual LANs (VLANs)
        • Configuring VLANs
      • Private VLANs
        • Private VLANs for ports in access mode
          • Membership rules for private VLANs in access mode
          • Promiscuous ports
          • Host ports
        • Private VLAN operation with ports in access mode
          • Portfast on private VLANS
        • Access mode private VLAN configuration example
        • Private VLANs for trunked ports
        • Trunked port private VLAN configuration example
        • Protocol based VLAN configuration example
    • Chapter 17: VLAN Commands
      • Command List
      • private-vlan
      • private-vlan association
      • port-vlan-forwarding-priority
      • show port-vlan-forwarding-priority
      • show vlan
      • show vlan classifier group
      • show vlan classifier group interface
      • show vlan classifier interface group
      • show vlan classifier rule
      • show vlan private-vlan
      • switchport access vlan
      • switchport enable vlan
      • switchport mode access
      • switchport mode private-vlan
      • switchport mode private-vlan trunk secondary
      • switchport mode private-vlan trunk promiscuous
      • switchport mode trunk
      • switchport private-vlan host-association
      • switchport private-vlan mapping
      • switchport trunk allowed vlan
      • switchport trunk native vlan
      • switchport voice dscp
      • switchport voice vlan
      • switchport voice vlan priority
      • vlan
      • vlan classifier activate
      • vlan classifier group
      • vlan classifier rule ipv4
      • vlan classifier rule proto
      • vlan database
    • Chapter 18: Spanning Tree Introduction: STP, RSTP, and MSTP
      • Introduction
      • Overview of Spanning Trees
        • Spanning tree operation
        • Spanning tree modes
      • Spanning Tree Protocol (STP)
      • Configuring STP
      • Rapid Spanning Tree Protocol (RSTP)
      • Configuring RSTP
      • Multiple Spanning Tree Protocol (MSTP)
        • Multiple Spanning Tree Instances (MSTI)
        • MSTP Regions
        • Common and Internal Spanning Tree (CIST)
        • MSTP Bridge Protocol Data Units (BPDUs)
      • Configuring MSTP
    • Chapter 19: Spanning Tree Commands
      • Command List
      • clear spanning-tree statistics
      • clear spanning-tree detected protocols (RSTP and MSTP)
      • debug mstp (RSTP and STP)
      • instance priority (MSTP)
      • instance vlan (MSTP)
      • region (MSTP)
      • revision (MSTP)
      • show debugging mstp
      • show spanning-tree
      • show spanning-tree brief
      • show spanning-tree mst
      • show spanning-tree mst config
      • show spanning-tree mst detail
      • show spanning-tree mst detail interface
      • show spanning-tree mst instance
      • show spanning-tree mst instance interface
      • show spanning-tree mst interface
      • show spanning-tree mst detail interface
      • show spanning-tree statistics
      • show spanning-tree statistics instance
      • show spanning-tree statistics instance interface
      • show spanning-tree statistics interface
      • show spanning-tree vlan range-index
      • spanning-tree autoedge (RSTP and MSTP)
      • spanning-tree bpdu
      • spanning-tree cisco-interoperability (MSTP)
      • spanning-tree edgeport (RSTP and MSTP)
      • spanning-tree enable
      • spanning-tree errdisable-timeout enable
      • spanning-tree errdisable-timeout interval
      • spanning-tree force-version
      • spanning-tree forward-time
      • spanning-tree guard root
      • spanning-tree hello-time
      • spanning-tree link-type
      • spanning-tree max-age
      • spanning-tree max-hops (MSTP)
      • spanning-tree mode
      • spanning-tree mst configuration
      • spanning-tree mst instance
      • spanning-tree mst instance path-cost
      • spanning-tree mst instance priority
      • spanning-tree mst instance restricted-role
      • spanning-tree mst instance restricted-tcn
      • spanning-tree path-cost
      • spanning-tree portfast (STP)
      • spanning-tree portfast bpdu-filter
      • spanning-tree portfast bpdu-guard
      • spanning-tree priority (bridge priority)
      • spanning-tree priority (port priority)
      • spanning-tree restricted-role
      • spanning-tree restricted-tcn
      • spanning-tree transmit-holdcount
      • undebug mstp
    • Chapter 20: Link Aggregation Introduction and Configuration
      • Introduction and Overview
      • Static and Dynamic (LACP) Link Aggregation
        • Static Channel Groups
        • Dynamic (LACP) Channel Groups
        • Link Aggregation Control Protocol (LACP)
      • Configuring an LACP Channel Group
        • Minimal LACP Group Configuration
      • Configuring a Static Channel Group
    • Chapter 21: Link Aggregation Commands
      • Introduction
      • Command List
      • clear lacp counters
      • channel-group
      • debug lacp
      • lacp port-priority
      • lacp system-priority
      • lacp timeout
      • show debugging lacp
      • show diagnostic channel-group
      • show etherchannel
      • show etherchannel detail
      • show etherchannel summary
      • show lacp-counter
      • show lacp sys-id
      • show port etherchannel
      • show static-channel-group
      • static-channel-group
      • undebug lacp
    • Chapter 22: Power over Ethernet Introduction
      • Introduction
        • PoE standards
        • PoE (all standards)
        • PoE (IEEE 802.3af)
        • Enhanced PoE
        • PoE+ (IEEE 802.3at)
        • Differences between PoE and PoE+
        • LLDP-MED (TIA-1057) with PoE+ (IEEE 802.3at)
        • PoE and PoE+ Applications
        • Power Device (PD) discovery
        • Power classes
          • Typical Values for PD Power Consumption
        • Power through the cable:
        • Cable Types
        • Static and Automatic Power Allocation
      • PoE and PoE+ Implementation
        • Power Capacity
        • PoE Port Allocation and Distribution
        • Power threshold
        • Negotiating Power Requirements
        • PoE port management
        • Powered Device (PD) detection
        • Port prioritization
        • Software monitoring
      • PoE and PoE+ Configuration
        • Add a description for a PoE or PoE+ port
        • Configuring Capacity and Priority on a PoE or PoE+ Port
        • Remotely monitoring power for all connected PDs
    • Chapter 23: Power over Ethernet Commands
      • Introduction
      • Command List
      • clear power-inline counters interface
      • debug power-inline
      • power-inline allow-legacy
      • power-inline description
      • power-inline enable
      • power-inline max
      • power-inline priority
      • power-inline usage-threshold
      • service power-inline
      • show debugging power-inline
      • show power-inline
      • show power-inline counters
      • show power-inline interface
      • show power-inline interface detail
  • Part 3: Layer Three, Switching and Routing
    • Chapter 24: Internet Protocol (IP) Addressing and Protocols
      • Introduction
      • Address Resolution Protocol (ARP)
        • Static ARP Entries
        • Timing Out ARP Entries
        • Deleting ARP Entries
        • ARP Logging
      • Domain Name System (DNS)
        • DNS Relay
      • Internet Control Message Protocol (ICMP)
      • Checking IP Connections
        • Ping
        • Traceroute
    • Chapter 25: IP Addressing and Protocol Commands
      • Introduction
      • Command List
      • arp-mac-disparity
      • arp-aging-timeout
      • arp (IP address MAC)
      • arp log
      • clear arp-cache
      • clear ip dns forwarding cache
      • debug ip dns forwarding
      • debug ip packet interface
      • ip address
      • ip dns forwarding
      • ip dns forwarding cache
      • ip dns forwarding dead-time
      • ip dns forwarding retry
      • ip dns forwarding source-interface
      • ip dns forwarding timeout
      • ip gratuitous-arp-link
      • ping
      • show arp
      • show debugging ip packet
      • show ip dns forwarding
      • show ip dns forwarding cache
      • show ip dns forwarding server
      • show ip interface
      • show ip sockets
      • tcpdump
      • traceroute
      • undebug ip packet interface
    • Chapter 26: IPv6 Introduction
      • Introduction
      • Overview
      • IPv6 Addresses and Prefixes
        • Address types
          • Unicast addresses
          • Anycast addresses
        • IPv6 Headers
          • Basic IPv6 header structure
        • The Internet Control Message Protocol (ICMPv6)
          • Neighbor Discovery
          • Stateless address autoconfiguration
        • IPv6 Routing
        • Integration of IPv4 and IPv6
      • IPv6 on your Switch
        • Enabling IPv6
        • IPv6 Stateless Address Autoconfiguration (SLAAC)
        • IPv6 EUI-64 Addressing
        • IPv6 Link-local Addresses
    • Chapter 27: IPv6 Commands
      • Command List
      • clear ipv6 neighbors
      • ipv6 address
      • ipv6 address autoconfig
      • ipv6 enable
      • ipv6 forwarding
      • ipv6 nd managed-config-flag
      • ipv6 nd minimum-ra-interval
      • ipv6 nd other-config-flag
      • ipv6 nd prefix
      • ipv6 nd ra-interval
      • ipv6 nd ra-lifetime
      • ipv6 nd reachable-time
      • ipv6 nd retransmission-time
      • ipv6 nd suppress-ra
      • ipv6 neighbor
      • ipv6 opportunistic-nd
      • ipv6 route
      • ping ipv6
      • show ipv6 forwarding
      • show ipv6 interface brief
      • show ipv6 neighbors
      • show ipv6 route
      • show ipv6 route summary
      • traceroute ipv6
    • Chapter 28: Route Selection
      • Introduction
      • Types of Routes
        • Interface Routes
        • Static Routes
      • RIB and FIB Routing Tables
        • Understanding the Routing Information Base (RIB)
        • Administrative Distance
        • Metric
          • Metrics Used by AlliedWare Plus Routing Protocols
        • Equal Cost Multipath Routing
        • How AlliedWare Plus Deletes Routes
        • How AlliedWare Plus Adds Routes
        • Troubleshooting routes not installed to the RIB
        • Troubleshooting routes not installed to the FIB
    • Chapter 29: Routing Commands
      • Introduction
      • Command List
      • ip route
      • maximum-paths
      • show ip route
      • show ip route database
      • show ip route summary
  • Part 4: Multicast Applications
    • Chapter 30: IGMP and IGMP Snooping Introduction
      • Introduction
      • IGMP
        • Joining a multicast group (Membership report)
        • Staying in the multicast group (Query message)
        • Leaving the multicast group (Leave message)
      • IGMP Snooping
        • How IGMP Snooping operates
        • IGMP Snooping and Querier configuration example
      • Query Solicitation
        • How Query Solicitation Works
        • Query Solicitation Operation
        • Speeding up IGMP convergence in a non-looped topology
        • Enabling Query Solicitation on multiple switches in a looped topology
    • Chapter 31: IGMP Snooping Commands
      • Introduction
      • Command List
      • clear ip igmp
      • clear ip igmp group
      • clear ip igmp interface
      • debug igmp
      • ip igmp
      • ip igmp access-group
      • ip igmp immediate-leave
      • ip igmp last-member-query-count
      • ip igmp last-member-query-interval
      • ip igmp limit
      • ip igmp querier-timeout
      • ip igmp query-holdtime
      • ip igmp query-interval
      • ip igmp query-max-response-time
      • ip igmp ra-option (Router Alert)
      • ip igmp robustness-variable
      • ip igmp snooping
      • ip igmp snooping fast-leave
      • ip igmp snooping mrouter
      • ip igmp snooping querier
      • ip igmp snooping report-suppression
      • ip igmp snooping routermode
      • ip igmp snooping tcn query solicit
      • ip igmp source-address-check
      • ip igmp ssm
      • ip igmp ssm-map enable
      • ip igmp ssm-map static
      • ip igmp static-group
      • ip igmp startup-query-count
      • ip igmp startup-query-interval
      • ip igmp version
      • show debugging igmp
      • show ip igmp groups
      • show ip igmp interface
      • show ip igmp snooping mrouter
      • show ip igmp snooping routermode
      • show ip igmp snooping statistics
      • undebug igmp
    • Chapter 32: MLD and MLD Snooping Introduction and Commands
      • MLD Introduction
        • MLD Snooping
        • MLD Snooping Configuration Examples
          • Enabling the MLD Snooping Querier on an interface
          • Enabling MLD Snooping globally and on an interface
          • Configuring a Multicast Router statically on an interface
          • Enabling MLD Snooping Fast-Leave Processing on an interface
          • Configuring MLD Snooping Report Suppression on an interface
      • Command List
      • clear ipv6 mld
      • clear ipv6 mld group
      • clear ipv6 mld interface
      • debug mld
      • ipv6 mld
      • ipv6 mld access-group
      • ipv6 mld immediate-leave
      • ipv6 mld last-member-query-count
      • ipv6 mld last-member-query-interval
      • ipv6 mld limit
      • ipv6 mld querier-timeout
      • ipv6 mld query-interval
      • ipv6 mld query-max-response-time
      • ipv6 mld robustness-variable
      • ipv6 mld snooping
      • ipv6 mld snooping fast-leave
      • ipv6 mld snooping mrouter
      • ipv6 mld snooping querier
      • ipv6 mld snooping report-suppression
      • ipv6 mld static-group
      • ipv6 mld version
      • show debugging mld
      • show ipv6 mld groups
      • show ipv6 mld interface
      • show ipv6 mld snooping mrouter
      • show ipv6 mld snooping statistics
  • Part 5: Access and Security
    • Chapter 33: Access Control Lists Introduction
      • Introduction
        • Overview
        • ACL Rules
        • ACL Source and Destination Addresses
        • ACL Reverse Masking
      • Hardware and Software ACL Types
        • Numbered ACLs (for Hardware and Software ACLs)
        • Hardware ACLs
        • Software ACLs
        • Defining Hardware MAC ACLs
        • Defining Hardware IP ACLs
        • Actions for Hardware ACLs
        • Attaching hardware ACLs to interfaces
      • Hardware ACLs and QoS classifications
        • Classifying Your Traffic
        • Security ACLs
        • QoS ACLs
        • Attaching hardware ACLs using QoS
        • Filtering hardware ACLs with QoS
        • Using QoS Match Commands with TCP Flags
      • ACL Filter Sequence Numbers
        • ACL Filter Sequence Number Behavior
        • ACL Filter Sequence Number Applicability
        • ACL Filter Sequence Number Types
          • ACL Commands Without ACL Filter Sequence Numbers
          • ACL Filter Sequence Number Entry Examples
      • ACL Filter Sequence Configuration
        • Creating ACLs in Global Configuration Mode
        • Display the ACL configuration details
    • Chapter 34: IPv4 Hardware Access Control List (ACL) Commands
      • Introduction
      • IPv4 Hardware Access List Commands and Prompts
      • Command List
      • access-group
      • access-list (hardware IP numbered)
      • access-list (hardware MAC numbered)
      • access-list hardware (named)
      • (access-list hardware ICMP filter)
      • (access-list hardware IP protocol filter)
      • (access-list hardware MAC filter)
      • (access-list hardware TCP UDP filter)
      • commit (IPv4)
      • show access-list (IPv4 Hardware ACLs)
      • show interface access-group
    • Chapter 35: IPv4 Software Access Control List (ACL) Commands
      • Introduction
      • IPv4 Software Access List Commands and Prompts
      • Command List
      • access-list extended (named)
      • access-list (extended numbered)
      • (access-list extended ICMP filter)
      • (access-list extended IP filter)
      • (access-list extended IP protocol filter)
      • (access-list extended TCP UDP filter)
      • access-list standard (named)
      • access-list (standard numbered)
      • (access-list standard named filter)
      • (access-list standard numbered filter)
      • clear ip prefix-list
      • dos
      • maximum-access-list
      • show access-list (IPv4 Software ACLs)
      • show dos interface
      • show ip access-list
    • Chapter 36: IPv6 Hardware Access Control List (ACL) Commands
      • Introduction
      • IPv6 Hardware Access List Commands and Prompts
      • Command List
      • commit (IPv6)
      • ipv6 access-list (named)
      • (ipv6 access-list named ICMP filter)
      • (ipv6 access-list named protocol filter)
      • (ipv6 access-list named TCP UDP filter)
      • ipv6 traffic-filter
      • show ipv6 access-list (IPv6 Hardware ACLs)
    • Chapter 37: IPv6 Software Access Control List (ACL) Commands
      • Introduction
      • IPv6 Software Access List Commands and Prompts
      • Command List
      • ipv6 access-list extended (named)
      • ipv6 access-list extended proto
      • (ipv6 access-list extended IP protocol filter)
      • (ipv6 access-list extended TCP UDP filter)
      • ipv6 access-list standard (named)
      • (ipv6 access-list standard filter)
      • show ipv6 access-list (IPv6 Software ACLs)
    • Chapter 38: Quality of Service (QoS) Introduction
      • Introduction
        • QoS Operations
      • QoS Packet Information
        • Link Layer QoS
        • Differentiated Services Architecture
        • The Differential Services Field
        • Processing pre-marked packets
      • Applying QoS on Your Switch
      • Classifying your Data
        • Class Maps
          • Creating a class-map
          • Creating and configuring default class-maps
          • Applying a match command to a class-map
          • Associating a class-map with a policy-map
        • Policy Maps
      • Premarking and Remarking Your Traffic
        • CoS to egress queue premarking
          • CoS tagging commands
          • Mapping CoS tags to traffic types
          • CoS settings for VCStack stack operation
        • DSCP to egress queue premarking
          • DSCP to egress queue premarking commands
          • Setting the Trust DSCP Map
      • Rate Limiting Traffic
      • Policing (Metering) Your Data
        • Single-rate Three-color Policing
        • Two-rate Three-color Policing
        • Configuring and Applying a Policer
      • Remarking Your Data
      • Configuring the Egress Queues
        • Egress Queues and QoS markers
        • Egress Queue Commands Hierarchy
      • Egress Queue Shaping
        • Scheduling
          • Strict priority servicing
          • Weighted round robin servicing
        • Drop Mode
          • Tail Drop
      • Storm Protection
      • Policy-Based Routing
        • Practical Example
          • Configuration Overview
          • Configuration Steps
    • Chapter 39: QoS Commands
      • Command List
      • class
      • class-map
      • clear mls qos interface policer-counters
      • default-action
      • description (QoS policy-map)
      • egress-rate-limit
      • match access-group
      • match cos
      • match dscp
      • match eth-format protocol
      • match inner-cos
      • match inner-vlan
      • match ip-precedence
      • match mac-type
      • match tcp-flags
      • match vlan
      • mls qos cos
      • mls qos enable
      • mls qos map cos-queue to
      • mls qos map premark-dscp to
      • no police
      • police single-rate action
      • police twin-rate action
      • policy-map
      • priority-queue
      • remark-map
      • remark new-cos
      • service-policy input
      • set ip next-hop (PBR)
      • show class-map
      • show mls qos interface
      • show mls qos interface policer-counters
      • show mls qos interface queue-counters
      • show mls qos interface storm-status
      • show mls qos maps cos-queue
      • show mls qos maps premark-dscp
      • show policy-map
      • storm-action
      • storm-downtime
      • storm-protection
      • storm-rate
      • storm-window
      • trust dscp
      • wrr-queue disable queues
      • wrr-queue egress-rate-limit queues
      • wrr-queue weight queues
    • Chapter 40: 802.1X Introduction and Configuration
      • Introduction
        • 802.1X System Components
          • 802.1X component protocols
          • Basic steps in an 802.1X conversation
          • Example message sequence
      • The 802.1X Implementation
      • Configuring 802.1X
        • Names of Commands Used
        • Validation Commands
    • Chapter 41: 802.1X Commands
      • Command List
      • debug dot1x
      • dot1x control-direction
      • dot1x eap
      • dot1x eapol-version
      • dot1x initialize interface
      • dot1x initialize supplicant
      • dot1x keytransmit
      • dot1x max-auth-fail
      • dot1x max-reauth-req
      • dot1x port-control
      • dot1x timeout tx-period
      • show debugging dot1x
      • show dot1x
      • show dot1x diagnostics
      • show dot1x interface
      • show dot1x sessionstatistics
      • show dot1x statistics interface
      • show dot1x supplicant
      • show dot1x supplicant interface
      • undebug dot1x
    • Chapter 42: Authentication Introduction and Configuration
      • Authentication Introduction
        • Configuring a Guest VLAN
      • 802.1X-Authentication
      • Web-Authentication
        • What is Web-Authentication?
        • Web-Authentication Basics
        • Configuring Web-Authentication
          • Choosing the Web-authentication server address
        • Starting a Web-Authentication Session
        • Support for Protocols Underlying Web- Authentication
          • DHCP server for Web-authentication
          • Interception of clients’ ARPs
          • Proxy DNS response
        • Web-Authentication Timeout Connect
        • Web Authorization Proxy
      • MAC-Authentication
        • Why is MAC-Authentication Required?
        • How Does MAC-Authentication Work?
        • Configuring MAC-Authentication
      • Tri-Authentication
      • Tri-Authentication Configuration
      • Two-step Authentication
      • Ensuring Authentication Methods Require Different Usernames and Passwords
      • Roaming Authentication
        • Roaming Authentication Overview
        • Roaming Authentication Feature Interactions
      • Unauthenticated Supplicant Traffic
        • Deciding When a Supplicant Fails Authentication
          • Deciding when a supplicant fails 802.1X authentication
          • Deciding when a supplicant fails Web authentication
          • Deciding when a supplicant fails MAC authentication
        • Failed Authentication VLAN
        • Limitations on Allowed Feature Combinations
    • Chapter 43: Authentication Commands
      • Command List
      • auth auth-fail vlan
      • auth critical
      • auth dynamic-vlan-creation
      • auth guest-vlan
      • auth host-mode
      • auth log
      • auth max-supplicant
      • auth reauthentication
      • auth roaming disconnected
      • auth roaming enable
      • auth supplicant-mac
      • auth timeout connect-timeout
      • auth timeout quiet-period
      • auth timeout reauth-period
      • auth timeout server-timeout
      • auth timeout supp-timeout
      • auth two-step enable
      • auth-mac enable
      • auth-mac method
      • auth-mac password
      • auth-mac reauth-relearning
      • auth-web enable
      • auth-web forward
      • auth-web max-auth-fail
      • auth-web method
      • auth-web-server blocking-mode
      • auth-web-server dhcp ipaddress
      • auth-web-server dhcp lease
      • auth-web-server dhcp-wpad-option
      • auth-web-server gateway
      • auth-web-server http-redirect
      • auth-web-server intercept-port
      • auth-web-server ipaddress
      • auth-web-server mode
      • auth-web-server ping-poll enable
      • auth-web-server ping-poll failcount
      • auth-web-server ping-poll interval
      • auth-web-server ping-poll reauth-timer-refresh
      • auth-web-server ping-poll timeout
      • auth-web-server port
      • auth-web-server redirect-delay-time
      • auth-web-server redirect-url
      • auth-web-server session-keep
      • auth-web-server ssl
      • auth-web-server sslport
      • copy proxy-autoconfig-file
      • copy web-auth-https-file
      • erase proxy-autoconfig-file
      • erase web-auth-https-file
      • show auth two-step supplicant brief
      • show auth-mac
      • show auth-mac diagnostics
      • show auth-mac interface
      • show auth-mac sessionstatistics
      • show auth-mac statistics interface
      • show auth-mac supplicant
      • show auth-mac supplicant interface
      • show auth-web
      • show auth-web diagnostics
      • show auth-web interface
      • show auth-web sessionstatistics
      • show auth-web statistics interface
      • show auth-web supplicant
      • show auth-web supplicant interface
      • show auth-web-server
      • show proxy-autoconfig-file
    • Chapter 44: AAA Introduction and Configuration
      • AAA Introduction
        • Available functions and server types
        • Server Groups and Method Lists
          • Server Groups
          • Method Lists
          • Default Method Lists
      • Configuring AAA Login Authentication
        • AAA Configuration Tasks
          • AAA 802.1x Authentication Configuration:
      • Sample Authentication Configurations
        • Sample 802.1X Authentication Configuration
        • Sample MAC Authentication Configuration
        • Sample Web-Authentication Configuration
        • Sample Tri-Authentication Configuration
    • Chapter 45: AAA Commands
      • Command List
      • aaa accounting auth-mac default
      • aaa accounting auth-web default
      • aaa accounting commands
      • aaa accounting dot1x
      • aaa accounting login
      • aaa accounting update
      • aaa authentication auth-mac
      • aaa authentication auth-web
      • aaa authentication dot1x
      • aaa authentication enable default group tacacs+
      • aaa authentication enable default local
      • aaa authentication login
      • aaa group server
      • aaa local authentication attempts lockout-time
      • aaa local authentication attempts max-fail
      • accounting login
      • clear aaa local user lockout
      • debug aaa
      • login authentication
      • show debugging aaa
      • undebug aaa
    • Chapter 46: RADIUS Introduction and Configuration
      • Introduction
        • RADIUS Packets
        • RADIUS Attributes
        • RADIUS Security
          • Shared Secret
          • Authenticator
          • Password Encryption
        • RADIUS Proxy
        • RADIUS Accounting
      • RADIUS Configuration
        • Switch Configuration Tasks
        • Switch to RADIUS Server Communication
        • AAA Server Groups Configuration
          • Configuring AAA Server Groups with Deadtime
          • Specifying RADIUS Authentication
          • Specifying RADIUS Accounting
          • Monitoring and Maintaining RADIUS
      • RADIUS Configuration Examples
        • RADIUS Authentication
        • Single RADIUS Server Configuration
        • Multiple RADIUS Server Configuration
        • RADIUS Server Group Configuration
        • RADIUS Server Configuration using Server Groups
    • Chapter 47: RADIUS Commands
      • Command List
      • deadtime (RADIUS server group)
      • debug radius
      • ip radius source-interface
      • radius-server deadtime
      • radius-server host
      • radius-server key
      • radius-server retransmit
      • radius-server timeout
      • server (Server Group)
      • show debugging radius
      • show radius
      • show radius statistics
      • undebug radius
    • Chapter 48: TACACS+ Introduction and Configuration
      • Introduction
      • TACACS+ Overview
        • The AlliedWare Plus TACACS+ Implementation
        • Authentication
        • Authorization
        • Accounting
      • Configuration
        • Configure TACACS+
        • TACACS+ Configuration Example
    • Chapter 49: TACACS+ Commands
      • Command List
      • tacacs-server host
      • tacacs-server key
      • tacacs-server timeout
      • show tacacs+
    • Chapter 50: Local RADIUS Server Introduction and Configuration
      • Local RADIUS Server Introduction
        • Enable the Local RADIUS Server
        • Add the Local RADIUS Server as a RADIUS Server
        • Add authenticators to the list of authenticators
        • Configure the Local RADIUS Server User Database
          • Add users to the RADIUS user list without assigning VLANs
          • Add users to the RADIUS user list and assign VLANs
        • Authenticating login sessions
        • RADIUS Authentication with User Privileges
          • Removing users from the RADIUS users list
        • Creating certificates for single users and all users
          • Create a certificate for a single user
          • Create a certificate for all users
          • Exporting certificates
      • Defined RADIUS attributes list
    • Chapter 51: Local RADIUS Server Commands
      • Command List
      • attribute
      • authentication
      • clear radius local-server statistics
      • copy fdb-radius-users (to file)
      • copy local-radius-user-db (from file)
      • copy local-radius-user-db (to file)
      • crypto pki enroll local
      • crypto pki enroll local local-radius-all-users
      • crypto pki enroll local user
      • crypto pki export local pem
      • crypto pki export local pkcs12
      • crypto pki trustpoint local
      • debug crypto pki
      • domain-style
      • egress-vlan-id
      • egress-vlan-name
      • group
      • nas
      • radius-server local
      • server auth-port
      • server enable
      • show crypto pki certificates
      • show crypto pki certificates local-radius-all-users
      • show crypto pki certificates user
      • show crypto pki trustpoints
      • show radius local-server group
      • show radius local-server nas
      • show radius local-server statistics
      • show radius local-server user
      • user (RADIUS server)
      • vlan (RADIUS server)
    • Chapter 52: Secure Shell (SSH) Introduction
      • Introduction
        • Secure Shell on the AlliedWare Plus OS
      • Configuring the SSH Server
        • Creating a Host Key
        • Enabling the Server
        • Modifying the Server
        • Validating the Server Configuration
        • Adding SSH Users
        • Authenticating SSH Users
        • Adding a Login Banner
        • Monitoring the Server and Managing Sessions
        • Debugging the Server
      • Configuring the SSH Client
        • Modifying the Client
        • Adding SSH Servers
        • Authenticating with a Server
        • Connecting to a Server and Running Commands
        • Copying files to and from the Server
        • Debugging the Client
    • Chapter 53: Secure Shell (SSH) Configuration
      • SSH Server Configuration Example
    • Chapter 54: Secure Shell (SSH) Commands
      • Introduction
      • Command List
      • banner login (SSH)
      • clear ssh
      • crypto key destroy hostkey
      • crypto key destroy userkey
      • crypto key generate hostkey
      • crypto key generate userkey
      • crypto key pubkey-chain knownhosts
      • crypto key pubkey-chain userkey
      • debug ssh client
      • debug ssh server
      • service ssh
      • show banner login
      • show crypto key hostkey
      • show crypto key pubkey-chain knownhosts
      • show crypto key pubkey-chain userkey
      • show crypto key userkey
      • show running-config ssh
      • show ssh
      • show ssh client
      • show ssh server
      • show ssh server allow-users
      • show ssh server deny-users
      • ssh
      • ssh client
      • ssh server
      • ssh server allow-users
      • ssh server authentication
      • ssh server deny-users
      • ssh server resolve-host
      • ssh server scp
      • ssh server sftp
      • undebug ssh client
      • undebug ssh server
    • Chapter 55: DHCP Snooping Introduction and Configuration
      • Introduction
      • DHCP Snooping
        • DHCP Snooping Database
        • DHCP Relay Agent Option 82
        • Traffic Filtering with DHCP Snooping
        • ARP Security
        • MAC Address Verification
        • DHCP Snooping Violations
      • Interactions with Other Features
      • Configuration
        • Configure DHCP Snooping
        • Disabling DHCP Snooping
        • Related Features
    • Chapter 56: DHCP Snooping Commands
      • Command List
      • arp security
      • arp security violation
      • clear arp security statistics
      • clear ip dhcp snooping binding
      • clear ip dhcp snooping statistics
      • debug arp security
      • debug ip dhcp snooping
      • ip dhcp snooping
      • ip dhcp snooping agent-option
      • ip dhcp snooping agent-option allow-untrusted
      • ip dhcp snooping agent-option circuit-id vlantriplet
      • ip dhcp snooping agent-option remote-id
      • ip dhcp snooping binding
      • ip dhcp snooping database
      • ip dhcp snooping delete-by-client
      • ip dhcp snooping delete-by-linkdown
      • ip dhcp snooping max-bindings
      • ip dhcp snooping subscriber-id
      • ip dhcp snooping trust
      • ip dhcp snooping verify mac-address
      • ip dhcp snooping violation
      • ip source binding
      • service dhcp-snooping
      • show arp security
      • show arp security interface
      • show arp security statistics
      • show debugging arp security
      • show debugging ip dhcp snooping
      • show ip dhcp snooping
      • show ip dhcp snooping acl
      • show ip dhcp snooping agent-option
      • show ip dhcp snooping binding
      • show ip dhcp snooping interface
      • show ip dhcp snooping statistics
      • show ip source binding
  • Part 6: Network Availability
    • Chapter 57: EPSR Introduction and Configuration
      • Introduction
      • Ring Components and Operation
      • Fault Detection and Recovery
        • Fault Recovery
        • Restoring Normal Operation
        • Managing Rings with Two Breaks
        • Recovery When One Break is Restored
          • Enhanced Recovery Disabled
          • Enhanced Recovery Enabled
      • Configuration Examples
        • Single Domain, Single Ring Network
          • Configure the Master Node
        • Single Ring, Dual Domain Network
      • Interconnected Rings
        • Superloop Protection
          • What is an EPSR Superloop?
        • EPSR Superloop Prevention
          • Configuration Rules for Superloop Protected EPSR Rings
        • Configuring a Basic Superloop Protected Two Ring EPSR Network
          • Configuration Example
          • On Ring 1- Configure the Master Node R-1
          • On Ring 1 - Configure the Transit Nodes A to C
          • On Ring 2 - Configure the Master Node R-2
          • On Rings 1 and 2 - Configure the Transit Nodes D and E
          • On Ring 2 - Configure the Transit Node F
        • Sample Show Output
        • Adding a new data VLAN to a functioning superloop topology
          • On Ring 1 EPSR Instance Blue - Configure each of the Transit Nodes that Connect to the Common Segment
          • On Ring 1 EPSR Instance Blue - Add VLAN 50 to the Master Node
          • On Ring 1 EPSR Instance Blue - Add VLAN 50 to the Transit Nodes
          • On Ring 2 EPSR Instance Green - Add VLAN 50 to the Master Node
          • On Ring 2 EPSR Instance Green - Add VLAN 50 to the remaining Transit Node
        • EPSR and Spanning Tree Operation
    • Chapter 58: EPSR Commands
      • Command List
      • debug epsr
      • epsr
      • epsr configuration
      • epsr datavlan
      • epsr enhancedrecovery enable
      • epsr mode master controlvlan primaryport
      • epsr mode transit controlvlan
      • epsr priority
      • epsr state
      • epsr trap
      • show debugging epsr
      • show epsr
      • show epsr common segments
      • show epsr config-check
      • show epsr <epsr-instance>
      • show epsr word counters
      • show epsr counters
      • show epsr summary
      • undebug epsr
  • Part 7: Network Management
    • Chapter 59: AMF Introduction and Configuration
      • Introduction to AMF
      • AMF Supported Products and Software Versions.
      • Key benefits of AMF
        • Unified command-line
        • Configuration backup and recovery
        • Rolling firmware upgrade
      • AMF Terminology
      • AMF network guidelines
        • Retention and use of the ‘manager’ username
        • Loop-free data plane
        • Aggregators
        • VCStacks
        • AMF Tunneling (virtual links)
          • Configuring a Virtual Link
          • Prioritizing the tunneled traffic
        • AMF external removable media
        • AMF interaction with QoS and ACLs
        • NTP and AMF
      • Configuring AMF
        • Simple AMF example with a single master
      • Verifying the AMF network
      • Using the AMF network
        • AMF backups
        • Safe removal of external storage media
      • Performing a manual backup
      • Backups on VCStacks running as AMF masters
      • Node recovery
        • Automatic node recovery
        • A “Clean” node
        • Manual node recovery
        • Node recovery on VCStacks
      • AMF safe configuration
        • How can I tell if my device has had AMF safe configuration applied?
        • What does safe config do?
        • How can I undo a safe configuration?
        • Adding a preconfigured device to the network
        • Using the unified CLI with working-sets
        • Automatic working-set groups
        • User-defined working-set groups
        • Executing commands on working-sets
          • Some commands are invalid for nodes in a working-set
          • Sub-configuration limitations for some nodes in a working- set
        • Interactive commands
      • Rolling-reboot firmware upgrade
        • Performing a rolling reboot upgrade
    • Chapter 60: AMF Commands
      • Introduction
        • AMF Naming Convention
      • atmf backup
      • atmf backup bandwidth
      • atmf backup enable
      • atmf backup now
      • atmf backup stop
      • atmf distribute firmware
      • atmf domain vlan
      • atmf enable
      • atmf group (membership)
      • atmf log-verbose
      • atmf management subnet
      • atmf management vlan
      • atmf master
      • atmf network-name
      • atmf reboot-rolling
      • atmf recover
      • atmf remote-login
      • atmf restricted-login
      • atmf virtual-link id ip remote-id remote-ip
      • atmf working-set
      • clear atmf links statistics
      • debug atmf
      • debug atmf packet
      • show atmf
      • show atmf backup
      • show atmf detail
      • show atmf diagnostics
      • show atmf group
      • show atmf group members
      • show atmf links
      • show atmf links detail
      • show atmf links statistics
      • show atmf memory
      • show atmf nodes
      • show atmf tech
      • show atmf working-set
      • show debugging atmf
      • show debugging atmf packet
      • show running-config atmf
      • switchport atmf-crosslink
      • switchport atmf-link
      • type atmf node
    • Chapter 61: NTP Introduction and Configuration
      • Introduction
      • Overview
      • NTP on the Switch
      • Troubleshooting
      • Configuration Example
    • Chapter 62: NTP Commands
      • Command List
      • ntp access-group
      • ntp authenticate
      • ntp authentication-key
      • ntp broadcastdelay
      • ntp master
      • ntp peer
      • ntp server
      • ntp source
      • ntp trusted-key
      • show counter ntp
      • show ntp associations
      • show ntp status
    • Chapter 63: Dynamic Host Configuration Protocol (DHCP) Introduction
      • Introduction
        • BOOTP
        • DHCP
        • DHCP Relay Agents
      • Configuring the DHCP Server
        • Create the Pool
        • Define the Network
        • Define the Range
        • Set the Lease
        • Enable DHCP Leasequery
        • Set the Options
      • DHCP Relay Agent Introduction
        • Configuring the DHCP Relay Agent
        • DHCP Relay Agent Information Option (Option 82)
          • Dealing with client-originated packets that already contain Option 82 information
          • Checking Option 82 information in DHCP Server Responses
          • Option 82 maximum message length
      • Configuring the DHCP Client
      • Clearing Dynamically Allocated Lease Bindings
    • Chapter 64: Dynamic Host Configuration Protocol (DHCP) Commands
      • Command List
      • clear ip dhcp binding
      • default-router
      • dns-server
      • domain-name
      • host
      • ip address dhcp
      • ip dhcp bootp ignore
      • ip dhcp pool
      • ip dhcp-relay agent-option
      • ip dhcp-relay agent-option checking
      • ip dhcp-relay agent-option remote-id
      • ip dhcp-relay information policy
      • ip dhcp-relay maxhops
      • ip dhcp-relay max-message-length
      • ip dhcp-relay server-address
      • range
      • service dhcp-relay
      • service dhcp-server
      • show counter dhcp-client
      • show counter dhcp-relay
      • show counter dhcp-server
      • show dhcp lease
      • show ip dhcp binding
      • show ip dhcp pool
      • show ip dhcp-relay
      • show ip dhcp server statistics
      • show ip dhcp server summary
      • subnet-mask
    • Chapter 65: DHCP for IPv6 (DHCPv6) Introduction and Configuration
      • DHCPv6 Introduction
        • DHCPv6 for IPv6
        • DHCPv6 RFCs
        • DHCPv6 Messages
          • DHCPv6 Message Types
          • DHCPv6 Client to DHCPv6 Server Messages
          • DHCPv6 Server to DHCPv6 Client Messages
          • DHCPv6 Relay to DHCPv6 Relay/Server Messages
          • DHCPv6 Relay/Server to DHCPv6 Relay Messages
        • DHCPv6 Renewal and Rebinding
        • Stateful DHCPv6 Message Exchange
        • Stateless DHCPv6 Message Exchange
        • DHCPv6 Relay Agent Stateful Message Exchange
      • DHCPv6 Client and Server Identification
        • DHCPv6 Unique Identifier (DUID)
        • Identity Associations (IAID, and IANA)
      • DHCPv6 Client Functionality
        • DHCPv6 Server Selection by a DHCPv6 Client
        • Configure DHCPv6 Stateful Client (Prefix)
          • Stateful_Client Configuration (IANA)
        • Configure DHCPv6 Stateless Client
          • Stateless_Client Configuration (SLAAC)
        • Configure DHCPv6 Relay / Client
          • Stateful_Client Configuration
          • Stateful_Client diagnostic output
          • DHCPv6_Relay Configuration
          • DHCPv6_Relay diagnostic output
    • Chapter 66: DHCP for IPv6 (DHCPv6) Commands
      • Command List
      • clear counter ipv6 dhcp-client
      • clear ipv6 dhcp client
      • ipv6 address dhcp
      • show counter ipv6 dhcp-client
      • show ipv6 dhcp
      • show ipv6 dhcp interface
    • Chapter 67: SNMP Introduction
      • Introduction
      • Network Management Framework
      • Structure of Management Information
        • Names
        • Instances
        • Syntax
        • Access
        • Status
        • Description
      • The SNMP Protocol
        • SNMP Versions
        • SNMP Messages
        • Polling versus Event Notification
        • Message Format for SNMPv1 and SNMPv2c
        • SNMP Communities (Version v1 and v2c)
        • SNMPv3 Entities
          • SNMP Engine
          • Entity Applications
        • SNMPv3 Message Protocol Format
      • SNMPv1 and SNMPv2c
        • SNMP MIB Views for SNMPv1 and SNMPv2c
        • SNMP Communities
        • Configuration Example (SNMPv1 and v2)
      • SNMPv3
        • SNMP MIB Views for SNMPv3
        • SNMP Groups
        • SNMP Users
        • Configuration Example (SNMPv3)
      • Using SNMP to Manage Files and Software
        • Copy a File to or from a TFTP Server
        • Upgrade Software and Configuration Files
    • Chapter 68: SNMP Commands
      • Command List
      • debug snmp
      • show counter snmp-server
      • show debugging snmp
      • show running-config snmp
      • show snmp-server
      • show snmp-server community
      • show snmp-server group
      • show snmp-server user
      • show snmp-server view
      • snmp trap link-status
      • snmp trap link-status suppress
      • snmp-server
      • snmp-server community
      • snmp-server contact
      • snmp-server enable trap
      • snmp-server engineID local
      • snmp-server engineID local reset
      • snmp-server group
      • snmp-server host
      • snmp-server location
      • snmp-server source-interface
      • snmp-server startup-trap-delay
      • snmp-server user
      • snmp-server view
      • undebug snmp
    • Chapter 69: SNMP MIBs
      • Introduction
        • About MIBs
        • About SNMP
        • Obtaining MIBs
        • Loading MIBs
      • Allied Telesis Enterprise MIB
        • AT-ALMMON-MIB
        • AT-ATMF-MIB
        • AT-BOARDS-MIB
        • AT-DHCPSN-MIB
        • AT-DNS-CLIENT-MIB
        • AT-ENVMONv2-MIB
        • AT-EPSRv2-MIB
        • AT-FILEv2-MIB
        • AT-IP-MIB
        • AT-LICENSE-MIB
        • AT-LOG-MIB
        • AT-LOOPPROTECT-MIB
        • AT-MIBVERSION-MIB
        • AT-NTP-MIB
        • AT-PRODUCTS-MIB
        • AT-RESOURCE-MIB
        • AT-SETUP-MIB
        • AT-SMI-MIB
        • AT-SYSINFO-MIB
          • AT-PORTINFO
        • AT-TRIGGER-MIB
        • AT-USER-MIB
        • AT-VCSTACK-MIB
      • Other Enterprise MIBs
        • sFlow-MIB
      • Public MIBs
    • Chapter 70: LLDP, LLDP-MED and Voice VLAN Introduction and Configuration
      • Introduction
      • Link Layer Discovery Protocol
      • LLDP-MED
      • Voice VLAN
      • LLDP Advertisements
        • Type-Length-Value (TLV)
        • LLDP-MED: Location Identification TLV
      • Transmission and Reception
        • LLDP-MED Operation
      • Storing LLDP Information
      • Configuring LLDP
        • Configure LLDP
        • Configure LLDP-MED
        • Configure Authentication for Voice VLAN
    • Chapter 71: LLDP Commands
      • Introduction
      • Command List
      • clear lldp statistics
      • clear lldp table
      • debug lldp
      • lldp faststart-count
      • lldp holdtime-multiplier
      • lldp management-address
      • lldp med-notifications
      • lldp med-tlv-select
      • lldp non-strict-med-tlv-order-check
      • lldp notification-interval
      • lldp notifications
      • lldp port-number-type
      • lldp reinit
      • lldp run
      • lldp timer
      • lldp tlv-select
      • lldp transmit receive
      • lldp tx-delay
      • location civic-location configuration
      • location civic-location identifier
      • location civic-location-id
      • location coord-location configuration
      • location coord-location identifier
      • location coord-location-id
      • location elin-location
      • location elin-location-id
      • show debugging lldp
      • show lldp
      • show lldp interface
      • show lldp local-info
      • show lldp neighbors
      • show lldp neighbors detail
      • show lldp statistics
      • show lldp statistics interface
      • show location
    • Chapter 72: SMTP Commands
      • Command List
      • debug mail
      • delete mail
      • mail
      • mail from
      • mail smtpserver
      • show counter mail
      • show mail
      • undebug mail
    • Chapter 73: RMON Introduction and Configuration
      • Introduction
      • Overview
      • RMON Configuration Example
    • Chapter 74: RMON Commands
      • Command List
      • rmon alarm
      • rmon collection history
      • rmon collection stats
      • rmon event
      • show rmon alarm
      • show rmon event
      • show rmon history
      • show rmon statistics
    • Chapter 75: Triggers Introduction
      • Introduction
      • Trigger Facility
      • Configuring a Trigger
      • Troubleshooting Triggers
    • Chapter 76: Triggers Configuration
      • Introduction
      • Restrict Internet Access
      • Capture Unusual CPU and RAM Activity
      • See Daily Statistics
      • Turn Off Power to Port LEDs
      • Reduce Power Supplied to Ports
      • Capture Show Output and Save to a USB Storage Device
      • Load a Release File From a USB Storage Device
    • Chapter 77: Trigger Commands
      • Command List
      • active (trigger)
      • day
      • debug trigger
      • description (trigger)
      • repeat
      • script
      • show debugging trigger
      • show running-config trigger
      • show trigger
      • test
      • time (trigger)
      • trap
      • trigger
      • trigger activate
      • type cpu
      • type interface
      • type memory
      • type periodic
      • type ping-poll
      • type reboot
      • type stack disabled-master
      • type stack master-fail
      • type stack member
      • type stack link
      • type time
      • type usb
      • undebug trigger
    • Chapter 78: Ping Polling Introduction and Configuration
      • Introduction
      • How Ping Polling Works
      • Configuring Ping Polling
        • Creating a Polling Instance
        • Customizing a Polling Instance
        • Troubleshooting Ping Polling
      • Interaction with Other Protocols
    • Chapter 79: Ping-Polling Commands
      • Command List
      • active (ping-polling)
      • clear ping-poll
      • critical-interval
      • debug ping-poll
      • description (ping-polling)
      • fail-count
      • ip (ping-polling)
      • length (ping-poll data)
      • normal-interval
      • ping-poll
      • sample-size
      • show counter ping-poll
      • show ping-poll
      • source-ip
      • timeout (ping polling)
      • up-count
      • undebug ping-poll
    • Chapter 80: sFlow Introduction and Configuration
      • sFlow Introduction
      • The sFlow Agent
        • Agent components and functionality
        • Sampling Methods
          • Frame Sampling
          • Data Confidentiality
          • Counter Polling
      • The sFlow Collector
      • Configuring sFlow on your Switch
        • Configuration Procedure
          • Information Gathering
          • Managing the sFlow processing overhead
        • Configuration Examples
          • Configuration Procedure
      • sFlow Datagrams
      • The sFlow MIB
    • Chapter 81: sFlow Commands
      • Command List
      • debug sflow
      • debug sflow agent
      • sflow agent (address)
      • sflow collector (address)
      • sflow collector max-datagram-size
      • sflow enable
      • sflow max-header-size
      • sflow polling-interval
      • sflow sampling-rate
      • show debugging sflow
      • show running-config sflow
      • show sflow
      • show sflow interface
      • undebug sflow
  • Part 8: Virtual Chassis Stacking
    • Chapter 82: VCStack Introduction
      • VCStack Introduction
        • Features of Virtual Chassis Stacking
        • VCStack Capable Switches
        • The Physical Stack
          • VCStack cables, and connections
        • Two Switch Stack Configuration
          • Ring configuration
          • Resiliency link
          • Resiliency link configurations via switch ports
          • Ring configuration
        • Resilient Stacked Topology
      • Stack Formation
        • The Role of the Stack Master
          • Selecting the stack master
          • Common Stack Configuration
        • Stack Management VLAN
          • Stack member identification
          • Running commands on specific stack members
          • For more information on using this command, see the remote-login command on page 83.5.
          • Running QoS within a VCStack
      • Stack Member Failure and Recovery
        • Fixed or Virtual MAC Addressing
          • Enabling the stack virtual-mac
          • Disabling the stack virtual-mac
        • Stack Resiliency Link
          • Stack recovery states
        • Stack Failure Recovery
        • Stack Separation and Recovery
        • Stack Maintenance
          • Adding a stack member
          • Replacing a stack member
          • Combining separate stacks
          • Disabled Master
      • Disabled Master Monitoring (DMM)
      • Provisioning (Stack Members)
        • Provisioned Board Classes
        • Applying Hardware Provisioning
          • Provisioning Error Messages
        • Removing Hardware Provisioning
        • Displaying Provisioned Configurations
          • Displaying provisioned hardware status
        • Provisioning and Configuration Management
      • Software Version Auto Synchronization
        • Introduction
        • How auto synchronization works
          • Software version comparison
          • Auto synchronization limitations
          • Incompatible software releases
          • Upgrading stack software reliably
    • Chapter 83: Stacking Commands
      • Introduction
      • Command List
      • clear counter stack
      • debug stack
      • reboot rolling
      • reload rolling
      • remote-login
      • show counter stack
      • show debugging stack
      • show running-config stack
      • show provisioning (stack)
      • show stack
      • show stack resiliencylink
      • stack disabled-master-monitoring
      • stack enable
      • stack management subnet
      • stack management vlan
      • stack priority
      • stack renumber
      • stack renumber cascade
      • stack resiliencylink
      • stack software-auto-synchronize
      • stack virtual-chassis-id
      • stack virtual-mac
      • switch provision (stack)
      • switchport resiliencylink
      • undebug stack
• Appendix A: Command List
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • L
  • M
  • N
  • P
  • R
  • S
  • T
  • U
  • V
  • W
  • (ACL Filters)
• Appendix B: Glossary
  • Numerics
    • 10BaseT
    • 802.1X
  • A
    • AAA
    • Access-list
    • ACL
    • ACL sequence numbers
    • ACL types
    • Active master
    • Address resolution
    • Adjacency
    • ARP
    • ASCII
    • ASIC
    • Asynchronous
    • Autonegotiation
  • B
    • BIST
    • B-MAC
    • BPDU
    • Bridge
    • Broadcast
    • Broadcast domain
    • BOOTP
    • B-TAG
    • B-VID
    • B-VLAN
  • C
    • CHAP
    • CIST
    • Classification
    • Class maps
    • CLI
    • C-MAC
    • Collision domain
    • Continuous reboot prevention
    • Control VLAN
    • CoS
    • Cost
    • C-TAG
    • C-VID
    • C-VLAN
  • D
    • Data VLAN
    • Designated bridge
    • DHCP
    • DHCP Leasequery
    • DHCP relay agent option 82
    • DHCP relay agents
    • DHCP snooping
    • Digital Diagnostics Monitoring (DDM)
    • Disabled master
    • DLF
    • DMM (disabled master monitoring)
    • DNS
    • DNS relay
    • DoS
    • DSCP value
    • Duplex mode
    • Dynamic channel group
    • Dynamic Link Failover
  • E
    • EAP
    • EEE
    • Etherchannel
    • Ethernet Protection Switching Ring
    • EPSR
    • EPSR domain
    • Egress
  • F
    • FDB
    • FIB
    • Full duplex
  • G
    • Guest VLAN
  • H
    • Half duplex
    • Hardware ACLs
  • I
    • ICMP
    • ICMPv6
    • IGMP
    • IGMP querier or router
    • IGMP snooper
    • Ingress
    • IP directed broadcast
    • IP Helper
    • I-SID
    • ISP
    • I-TAG
  • J
  • K
  • L
    • LACP
    • LACP aggregator
    • LACP channel group
    • LAG
    • Layer 3 switch
    • LED
    • Link aggregation group
    • Link-local addresses
    • LLDP
    • LLDPDU
    • LLDP advertisements
    • LLDP-MED
    • Local RADIUS server
    • LPI
    • LSA
  • M
    • MAC address learning
    • MAC authentication
    • Master node
    • MD5
    • Metering
    • Metric
    • MLD
    • MLD snooping
    • MSTI
    • MSTP
    • MSTP regions
    • Multicast
  • N
    • NAC
    • NAS
    • Next hop
    • NTP
  • P
    • PAP
    • PDs
    • Ping
    • Ping-of-death attack
    • Ping polling
    • PoE
    • Policing
    • Policy maps
    • Port bit map
    • Port mirroring
    • PPP
    • Premarking
    • Primary port
    • Provisioning
    • PSE
    • PSU
  • Q
    • Query Solicitation
    • QoS
    • Quality of Service
  • R
    • RADIUS
    • Redistribute
    • Remarking
    • Remote network MONitoring
    • Resiliency link
    • RIB
    • Ring port
    • RMON
    • Roaming Authentication
    • Root bridge
    • Root path cost
    • Route-map
    • RSTP
  • S
    • SCP
    • Script
    • Secondary port
    • sFlow
    • sFlow agent
    • SFTP
    • Software ACLs
    • Spanning tree
    • Spanning Tree Protocol Root Guard
    • SSH
    • Stack
    • Stack master
    • Stack member
    • S-TAG
    • Static aggregator
    • Static channel group
    • Storm-control
    • Storm protection
    • STP
    • STP root guard
    • Subnet address
    • Subnet mask
    • Superloop
    • Switch instance
    • S-VID
    • S-VLAN
    • Synchronous
  • T
    • TACACS+
    • TCN
    • Thrash limiting
    • TLV
    • Traceroute
    • Transit node
    • Tri-authentication
    • Trigger
    • Type-Length-Value
  • U
    • Unicast
  • V
    • VCStack
    • VCStack fast failover
    • VID
    • Virtual Chassis Stacking
    • VLAN classification
    • VLAN ID
    • VLAN identifier
    • VLAN tag
    • Voice VLAN
    • VoIP
    • VRID
  • W
    • Web-authentication
    • Wildcard mask