Linkflap action – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 375
Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
15.13
linkflap action
Use this command to detect flapping on all ports. If more than 15 flaps occur in less than
15 seconds the flapping port will shut down.
Use the no variant of this command to disable flapping detection at this rate.
Syntax
linkflap action [shutdown]
no linkflap action
Default
Linkflap action is disabled by default.
Mode
Global Configuration
Example
To enable the linkflap action command on the switch, use the following commands:
Parameter
Description
linkflap
Global setting for link flapping.
action
Specify the action for port.
shutdown
Shutdown the port.
awplus#
configure terminal
awplus(config)#
linkflap action shutdown