Egress-vlan-name – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1347

Advertising

Local RADIUS Server Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

51.19

egress-vlan-name

Use this command to configure the standard RADIUS attribute “Egress-VLAN-Name (58)”
for the local RADIUS server user group.

Use the no variant of this command to remove the Egress-VLAN-Name attribute from the
local RADIUS server user group.

Syntax

egress-vlan-name <vlan-name> [tagged|untagged]

no egress-vlan-name

Default

By default, no Egress-VLAN-Name attributes are configured.

Mode

RADIUS Server Group Configuration

Usage

When a Voice VLAN is configured for dynamic VLAN allocation (

switchport voice vlan

command on page 17.29

), the RADIUS server must be configured to send the VLAN

information when an IP phone is successfully authenticated. Use either the

egress-vlan-id

command on page 51.18

or the

egress-vlan-name

command, and specify the tagged

parameter.

Examples

To configure the “Egress-VLAN-Name” attribute for the RADIUS server user group
NormalUsers with the VLAN name “vlan2” and all frames on this VLAN tagged, use the
commands:

To delete the “Egress-VLAN-Name” attribute for the NormalUsers group, use the
commands:

Related Commands

attribute
egress-vlan-id
switchport voice vlan

Parameter Description

<vlan-name>

The VLAN name to be configured as the Egress-VLAN-Name
attribute.

tagged

Set frames on the VLAN as tagged. This sets the tag indication field
to indicate that all frames on this VLAN are tagged.

untagged

Set all frames on the VLAN as untagged. This sets the tag indication
field to indicate that all frames on this VLAN are untagged.

awplus#

configure terminal

awplus(config)#

radius-server local

awplus(config-radsrv)#

group NormalUsers

awplus(config-radsrv-group)#

egress-vlan-name vlan2 tagged