Document Outline

• Section 1
• Introduction
• Section 2
• Specifications
  • 2.0 Specifications
  • 2.1 Delivery System Specifications
  • 2.2 Warranty (also see section 8)
  • 2.3 Parts List
• Section 3
• Laser Assembly Instructions
  • 3.0 Removing the Laser from the Packaging
    • 3.0.1 Instructions on Unpacking & Dealer Assistance
    • 3.0.2 Shipping Container Information
    • 3.0.3 Contents of Shipping Container
  • 3.1 Procedure for Proper Laser Assembly
    • 3.1.1 Wireless Foot Pedal Installation Procedure
    • 3.1.2 Power Cord Installation
    • 3.1.3 Direct Power Supply
    • 3.1.4 Installing the handpiece cable to the laser
    • 3.1.5 Inserting the unit-dose laser tip into the handpiece
    • 3.1.6 Placing the laser unit in the docking cradle
    • 3.1.7 Odyssey Navigator Remote Interlock
    • 3.1.8 Emergency Shutdown Switch
    • 3.1.9 Powering up the Laser
    • 3.1.10 Enter the digital key
    • 3.1.11 Installation Test
    • 3.1.12 Check of the Emergency Shutdown System
    • 3.1.13 Touch Screen Menu
    • 3.1.14 Preset Programs
  • 3.2 Evaluating the Facility and Environmental Considerations
    • 3.2.1 Power Requirements
    • 3.2.2 Heating and Ventilation
    • 3.2.3 Transport and Storage
    • 3.2.4 Lighting
    • 3.2.5 Combustible Chemicals and Gases
    • 3.2.6 High Speed Vacuum Systems
    • 3.2.7 Access and Visual
    • 3.2.8 Odyssey Navigator Diode Laser Frequency
• Section 4
• Safety Considerations
  • 4.1 Laser Safety Program
  • 4.2 Continuing Education
  • 4.3 In-Office Safety Issues
    • 4.3.1 Lighting
    • 4.3.2 Combustible chemicals or gases
    • 4.3.3 Safety Eyewear
    • 4.3.4 Test Firing the Laser
    • 4.3.5 Power Changes With Fiber Changes
    • 4.3.6 Danger - Laser In Use Signage
    • 4.3.7 Sharps Disposal and Sponge Removal
    • 4.3.8 Plume Evacuation
    • 4.3.9 Laser Security
    • 4.3.10 Emergency Shutdown Options
    • 4.3.11 Hard Tissue Procedures
• Section 5
• Operating the Laser
  • 5.0 Intended Uses
  • 5.1 Standby and Ready Status
  • 5.2 Continuous or Pulse Mode
    • 5.2.1 Continuous Wave (CW) Mode
    • 5.2.2 Pulsed Energy Mode
  • 5.3 Tissue Responses to Laser Energy
  • 5.4 Systems Procedures
    • 5.4.1 Treatment Area Requirements
    • 5.4.2 Foot Pedal
    • 5.4.3 Unit-dose Fiber Tip
    • 5.4.4 Fiber Preparation
    • 5.4.5 Emergency Shut Off Button
    • 5.4.6 Digital Key
    • 5.4.7 Setting Parameters for the Quick Set Mode
    • 5.4.8 Select Your Power
    • 5.4.9 Selecting Programs
    • 5.4.10 Aiming Beam
    • 5.4.11 Tips
    • 5.4.12 Procedure
    • 5.4.13 Odyssey Navigator Self Diagnostic and Monitoring
• Section 6
• System Components: Preparations, Care and Maintenance
  • 6.0 Unit Dose Fiber Tips
    • 6.0.1 General
    • 6.0.2 Replacing a Unit Dose Fiber Tip
  • 6.1 Fiber Preparation
    • 6.1.1 Quartz/Silica Fiber
    • 6.1.2 Cleaving the Fiber
    • 6.1.3 Initiating the Fiber
  • 6.2 Laser Maintenance
    • 6.2.1 Laser Chassis Disinfection
    • 6.2.2 LCD Display
    • 6.2.3 Calibration
    • 6.2.4 Battery Useful life
  • 6.3 Handpiece Sterilization
    • 6.3.1 Handpiece Components
    • 6.3.2 Recommended Autoclave Procedure
    • 6.3.3 Prepare Fiber
    • 6.3.4 Mounting the Tip
• Section 7
• Labels, Signs, Warnings and Manufacturer’s Information
  • 7.1 Regulatory Compliance
  • 7.2 Labels
    • 7.2.1 Danger Laser in Use
    • 7.2.2 Class 4 Laser Product
    • 7.2.3 Aiming Beam laser
    • 7.2.4 Interference with wireless signal.
  • 7.3 Device Cautions
  • 7.4 Nominal Ocular Hazard Distance (NOHD)
• Section 8
• Servicing
  • 8.1 Warranty Policy
  • 8.2 Repairs & Returns to Ivoclar Vivadent, Inc.
• Section 9
• Selected References on Laser Dentistry
• Section 10
• Troubleshooting