HP Photosmart 620 Series - Manual (Page 24)

22 hp photosmart 620 user’s manual
Using the flash
When the camera is turned on, the flash is automatically set to
Auto Flash Auto Flash Auto Flash Auto Flash . If you change the flash setting, the camera will
remain in that setting until you change it again or turn off the
camera. By using the
Flash Flash Flash Flash button, you can move through
the flash settings in the following order.
Icon Setting Description
Auto Flash Auto Flash Auto Flash Auto Flash The camera measures light and uses the
flash if necessary.
Red-eye Red-eye Red-eye Red-eye
reduction reduction reduction reduction
The camera measures light and uses the
flash with red-eye reduction if necessary.
Flash On Flash On Flash On Flash On The camera always flashes. If the light is
behind your subject, you can use the
flash to increase the light on the front of
your subject. This is also called “fill-
flash.”
Flash Off Flash Off Flash Off Flash Off The camera will not flash. Use this setting
when you do not want a flash (such as
with distant objects). This might result in
long exposures that will require a tripod.