Hubbell Electric Heater Company HSE User Manual

Page 17

Advertising
background image

17

IMMERSION THERMOSTAT

1. Disconnect power from unit.
2. Remove access cover and locate thermostat.
3. Remove high limit cover screw and cover.

Cover

Cover Screw

4. Disconnect the two (2) 14 gauge wires.

Wires

Capillary

Tube

5. Remove capillary tube and bulb from thermowell.

6. Remove two (2) mounting screws.

Mounting Screws

7. Replace thermostat using reverse procedure. (Note: Be sure to

place capillary tube into slot in base prior to installing cover.)

Advertising
This manual is related to the following products:

HE