HP 6000 - Manual (Page 7)

7
Key Features
· Light Weight- Platform is made of high quality, light weight Acrylic material for easy portability
·
USB Port Connectivity- Unit easily connects to the computer using a standard USB cable.
·
User Friendly Software- Our software has been designed to be understood easily to ensure the
shortest time to successful Antenna Measurement.
·
Quality Components- The rotator unit is built only with the best of components for long lasting
reliability.
·
Compatibility- Our Software supports a wide range of network analyzers and instruments that
use the GPIB / 488.1/2 and SCPI methods of communication.
·
Phase/Angle Measurement-Software can measure All four Vector S-Parameters over a
specified frequency range at each measurement point.
·
2-axis movement- 360 Degrees Horizontal at 1/4 degrees per measurement to +/- 45 degrees
vertical movement angle at 1 degree per step.
·
DC to 18 Ghz. Measurement Range- A wide frequency use range allows for a more diversified
range of antennas that can be tested with the system.
·
Rotary SMA Joint- Using a custom developed “Near Zero” noise Rotary Joint the system can
make accurate measurements without jeopardizing signal integrity.
·
Data Processing Feature-Designed for post measurement processing you can perform a range of
functions such as:
o Complete 3D Visualization for All Frequencies and Angles
o 3D Azimuth/Elevation plots for true 3D data representation.
o Ability to save and Recall Data Sets from RAM or local Disk
o Group Delay (distance calculation)
o Spherical 3D plots
o Ability to work with 4 different data sets at once
o Ability to map over 50,000 Different measurement Points onto one 3D chart
o Real-time Data over Movement V.S. Frequency
o Dipole Link Calculator
o Calculator for modifying measurement results and comparing antennas
o Export your data to a Spreadsheet or 3rd part application such as MatLAB
o Dipole Link Simulator allows creation of simulated dipole antennas
Features System Overview