HP XE3 - Manual (Page 51)

HP OmniBook XE3 Removal and Replacement 2-23
Removing the Hinge Saddle Set
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-9).
•
Keyboard (page 2-11).
•
Display assembly (page 2-17).
•
Top case (page 2-19).
3. Remove the two retaining screws from the bottom case.
Figure 2-17. Removing the Hinge Saddle Retaining Screws
Screws,
M2.5x8 mm