HP XE3 - Manual (Page 61)

HP OmniBook XE3 Removal and Replacement 2-33
Removing the CD-ROM/DVD Drive
(HP Authorized Service Providers Only)
Required Equipment
•
Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
•
Keyboard cover (page 2-9).
•
Keyboard (page 2-11).
•
Hard disk drive assembly (page 2-13).
•
Display assembly (page 2-17).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
2. Pull the CD-ROM or DVD assembly to the right, off of its connector and out of the notebook.
Figure 2-23. Removing the CD-ROM/DVD Drive
Reassembly Notes
•
Place the assembly so that its connector aligns with that on the motherboard, then gently press the
assembly to the left and into place.