Fairchild CAM/CMOS-2K.LS - Manual (Page 16)

SSM
This command allows you to set the Sync mode. When selecting the option you need, enter
the appropriate single digit number, and then hit enter.
Value Function
The camera returns …………..…..1 Free run
2 External Sync
3 External Sync, fixed integration
4 External Sync, electronic shutter
SCM
This command allows you to select a correction mode. When selecting the option you need,
enter the appropriate single digit number and then hit enter.
Value Function
The camera returns……………….1 M1 (1 st memory)
2 M2 (2 nd memory)
3 Offset Correction
4 Gain Correction
5 No Correction
6 Full Correction
STP
This command allows you to select a test pattern. When selecting the option you need, enter the
appropriate single digit number, and then hit enter.
Value Function
No output from camera…………1 Horizontal Ramp
2 Vertical Ramp
3 Vertical Bars
4 Vertical Ramp and Bars
5 0
6 4095
Other Video
CBR
This command allows you to change the Baud Rate. You will not see anything on your
monitor.
Here is a table of stored rates in the camera…Value Function
1 9600
2 19200
3 38400 (Default)
4 57600
5 115200
If you can’t resist changing the baud rate, select the appropriate single digit number and hit
enter.
Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manual • Rev C• 16 of 42