Setting the time-out limit, Adf front offset setting, Adf back offset setting – FUJITSU fi-4750L User Manual
Page 76: Flatbed offset setting, Time-out limit setting, Flatbed offset, Setting
Advertising
7-8
6. Setting the time-out limit
1 Press “Next”
or “Previous”
and let the
scanner display Screen 46.
<Screen 46>
2 At Screen 46, press
to increase the number
or press
to decrease the time-out limit.
Then press
to activate the setting.
NOTICE
Default is 30 seconds.
3 Press
to return.
7. ADF Front Offset Setting
8. ADF Back Offset Setting
9. Flatbed Offset Setting
<Screen 47>
1 Press “Next”
or “Previous”
and let the
scanner display the following:
• Front Offset by ADF : Screen 47.
• Back Offset by ADF : Screen 48.
• Offset of the Flatbed: Screen 49.
<Screen 48>
<Screen 49>
<Screen A>
2 Select “Yes” by pressing the
or
button,
then press
. The scanner displays
Screen A.
Advertising