FUJITSU fi-4750L - Manual (Page 77)

7-9
<Screen B (Example of ADF Front Offset)>
3 At Screen A, if you want to let the offset
return to default, select “Yes” otherwise “No”
then press
. The scanner displays
Screen B.
<Screen B (Example of ADF Back Offset)>
<Screen B (Example of FB Offset)>
<Screen C (Example of ADF Front Offset)>
4 At Screen B, press to increase the offset
or press to decrease offset.
The increment or decrement is 0.5 mm.
Then press
to activate the setting. The
scanner displays Screen C.
<Screen C (Example of ADF Back Offset)>
<Screen C (Example of FB Offset)>
5 At Screen C, press to increase the offset
or press to decrease the offset. Then
press to activate the setting. The
scanner displays the next item of the setup
mode.