Furman Sound HDS-16 - Manual (Page 11)

HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM
10
HDS-16 SPECIFICATIONS
INPUTS
Balanced, 50 kΩ, 90 dB CMRR
INPUT IMPEDANCE
50 kΩ
LINE OUTPUTS
Balanced or singled ended, 50 Ω, 68 dB OCMR
SINGLE CHANNEL GAIN
21 dB; +4 dBu for maximum output
REMOTE SWITCH
Connect tip to ring to mute all outputs except channel D
(solo function)
SIZE
3.5” H x 19.0” W x 8.0” D
WEIGHT
9.4 lb (4.27 kg)
HRM-16 SPECIFICATIONS
LINE OUTPUTS
Balanced or single ended, 50 Ω, 68 dB OCMR
POWER OUTPUT
750 mW at 32 Ω, 770 mW at 100 Ω , 260 mW at 600 Ω
REMOTE SWITCH
Connect tip to ring to activate the talkback microphone
SIZE
2.9” H x 11.0” W x 7.0” D
WEIGHT
3.5 lb (1.59 kg)
HDS-16 AND HRM-16
SYSTEM SPECIFICATIONS
DISTORTION AND NOISE
< 0.002% THD+Noise, 20 Hz - 20 kHz at full rated power
DYNAMIC RANGE
> 105 dB
FREQUENCY RESPONSE
+0/-1 dB 13 Hz - 32 kHz
POWER REQUIREMENTS
HDS-16: 120 VAC, 60 Hz, 82 W; HDS-16E: 230 VAC, 50
Hz, 82 W
CROSSTALK
< -95 dB at 10 kHz
SERVICE
Before returning any equipment for repair,
please be sure that it is adequately packed
and cushioned against damage in shipment,
and that it is insured. We suggest that you
save the original packaging and use it to ship
the product for servicing. Also, please enclose
a note giving your name, address, phone
number, e-mail address (if applicable), and a
description of the problem.
All equipment being returned for repair must
have a Return Authorization (R/A) Number.
To get a R/A number, please call the Furman
Service Department at (707) 763-1010 ext.
120 or 121, between 8 a.m. and 5 p.m., U.S.
Pacifi c Time. Please display your R/A Number
prominently on the front of all packages.