Furuno NAVNET 3D MFD8/12/BB - Manual (Page 12)

12
1.1.1. MFD8/12 Flush Mounting
1. Prepare a cutout in the mounting location using the template sheet (supplied) for the
MFD8 or 12.
2. Remove the front panel from the MFD by grasping it at its sides and pulling it
towards you.
3. Attach the mounting gasket (sponge) to the display unit.
4. Fix the display unit by using four self-tapping screws (supplied).
5. Attach the front panel to the display