Furuno NAVNET 3D MFD8/12/BB - Manual (Page 29)

29
Example of straight Ethernet Coupler (FUSA P/N= RJ4-5CN-STR):
Note: This Ethernet coupler is not waterproof.
Ethernet Cables that can be used to extend the Ethernet Radar Connection:
- 2 Meter RJ45 to RJ45 Ethernet Cable (P/N 000-167-175)
- 5 Meter RJ45 to RJ45 Ethernet Cable (P/N 000-167-176)
- 10 Meter RJ45 to RJ45 Ethernet Cable (P/N 000-167-177)
Please refer to the DRS Installation Guide for more information on connections inside
the antenna
2.5.1. Connecting the DRS to MFDBB
The MFDBB has an integrated HUB that allows simultaneous connection of the DRS
Ethernet cable and other Ethernet devices (HUB101 for example).
Note: Ethernet Ports 1 and 2 are dedicated for connection of the MCU001Keyboard.
Connect the DRS Ethernet Cable to Ethernet Port 3. Ethernet Port 4 will be available to
connect the HUB 101 or other Ethernet sensor