Furuno NAVNET 3D MFD8/12/BB - Manual (Page 57)

57
Water Depth Choose the depth sensor to
use. Smart sensor (NMEA
0183), Speed sensor
(ETR), Smart sensor
(NMEA 2000), Other
(NMEA 0183)
Water Temperature Choose the temperature
sensor to use. Smart sensor (NMEA
0183), Speed sensor
(ETR), Smart sensor
(NMEA 2000), Other
(NMEA0183)
Wind Choose the wind sensor to
use. FI-501/502, PB-100, WS-
200, PB-200, Other
Date & Time Choose the date and time
source to use. GP-320B, GP-310B, SC-
30, NMEA 2000 format
GPS, Other
Roll and Pitch Choose the motion sensor
to use. SC-30, SC-50, WS-200,
PB-200, Other
AIS Choose the AIS equipment
to use FA-150, FA-30, FA-50,
Other
Note: If a NMEA0183 Instruments does not appear as selection, make sure that the
Input Type was correctly connected and assigned at each MFD. Please refer to 3.2.3
NMEA0183.
-If you don’t have any DRS (Radar) and Network sounder click on Exit to finish the
installation. If you have a radar or sounder, click on “Next” to continue the configuration.