Safety information – Fluke 561s User Manual

Page 6

Advertising
background image

561

Users Manual

2

Safety Information

XW

Warning

A Warning identifies conditions and actions that pose hazards to the user. To

avoid electrical shock or personal injury, follow these guidelines:

•

* Do not point laser directly at eye or indirectly off reflective surfaces.

•

Before using the Thermometer inspect the case. Do not use the Thermometer

if it appears damaged. Look for cracks or missing plastic.

•

Replace the batteries as soon as the battery indicator (B) appears.

•

Do not use the Thermometer if it operates abnormally. Protection may be

impaired. When in doubt, have the Thermometer serviced.

•

Do not operate the Thermometer around explosive gas, vapor, or dust.

•

Do not connect the optional external probe to live electrical circuits.

•

To avoid a burn hazard, remember that highly reflective objects will often

result in lower than actual temperature measurements.

•

If the Thermometer is used in a manner not specified by the manufacturer, the

protection provided by the Thermometer may be impaired.

W

Caution

To avoid damaging the thermometer or the equipment under test protect them

from the following:

•

EMF (electro-magnetic fields) from arc welders, induction heaters, etc.

•

Static electricity.

•

Thermal shock (caused by large or abrupt ambient temperature changes-

allow 30 minutes for the Thermometer to stabilize before use).

•

Do not leave the Thermometer on or near objects of high temperature.


Table 1 and Figure 1 show various symbols and safety markings that are on the Thermometer
and in this manual.

Table 1. Symbols

Symbol Explanation

W

Risk of danger. Important information. See Manual.

X

Hazardous voltage. Risk of electrical shock.

*

Warning. Laser.

P

Conforms to requirements of European Union and European Free
Trade Association (EFTA).

~

Do not dispose of this product as unsorted municipal waste. Go to
Fluke’s web site for recycling information.

B

Battery

„

China metrology certification mark for measuring instruments
manufactured in the Peoples Republic of China (PRC).

Advertising