Furuno FAR-2157 - Manual (Page 57)

4-1
4. OPTIONAL EQUIPMENT
4.1 Gyro Converter GC-10
The Gyro Converter GC-10, incorporated inside the processor unit, converts analog gyrocompass
reading into digital coded bearing data for display on the radar screen.
This section explains how to install the GC-10 (mainly consisting of the GYRO CONVERTER
board) and set it up according to the gyrocompass connected.
Installing the GYRO CONVERTER board
Necessary Parts: Gyro Converter GC-10-2 (Code no. 000-080-440)
See packing list at the back of this manual for details.
1. Open the processor unit.
Processor unit, inside view
1
1
4
1
12
1 3
1 2
1 3
1
12
1
5 1
7 1 3