Weekly timer, En-7 – Friedrich P/N9368987060-01 User Manual

Page 8

Advertising
background image

En-7

WEEKLY TIMER

To start

CLOCK ADJUST

When the weekly timer is selected, the
timer starts automatically.

To cancel

Press the DELETE button to cancel
the timer mode.

The timer mode can also be
canceled by changing the timer
mode using the timer mode button.

To set the DAY OFF (for a holiday)

1

During the weekly timer,
press the SET button for 2
seconds or more to set the
day.

SET

Select the day to set the DAY
OFF.

Press the DAY (DAY OFF)
button for 2 seconds or
more to set the DAY OFF.

Press the SET button for 2
seconds or more to com-
plete the DAY OFF setting.

2

4

DAY OFF

DAY

SET

3

DAY OFF

DAY

NOTES

The DAY OFF setting is only available for days for which weekly settings already exist.

If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as
shown below.

DELETE

WEEKLY timer operation

The operating time for the current
day is displayed.

ex. Operating time 7:00 A.M.

–6:00 P.M. (7:00–18:00)

SU MO TU WE TH FR SA

3 6 9 12 15 18 21

3 6 9 12 15 18 21

SU MO TU WE TH FR SA

3 6 9 12 15 18 21

SU MO TU WE TH FR SA

3 6 9 12 15 18 21

To cancel

Follow the same procedures as

those for setup.

ex. The DAY OFF is set for Monday.

mark: Indicates the DAY OFF

Normal

Next day setting

Setting day

Preceding day

Next day

Setting day

Preceding day

Next day

The DAY OFF setting can only be set one time. The DAY OFF setting is cancelled automatically after the set day has
passed.

ON

OFF

ON

OFF

DAY OFF

WEEKLY

WEEKLY

WEEKLY

WEEKLY

ON

OFF

ON

OFF

DAY OFF

NOTES

(1) PRECAUTIONS DURING WEEKLY TIMER SETUP

Setup is not possible in the following cases, so amend
the time.
• Be sure to set the ON time first, then the OFF time. If

either the ON time or the OFF time is not set correctly,
the timer will not operate properly.

• The WEEKLY 2 settings cannot be set earlier than the

WEEKLY 1 settings.

• The WEEKLY 1 and WEEKLY 2 time spans cannot over-

lap.

(2) The earliest OFF time you can set is 30 minutes after the

ON time.

(3) The OFF time can be carried over to the next day.
(4) Even if the timer operation is set, the timer indicator lamp

of the indoor unit does not light up. (The timer indicator
lamp is used for wireless remote controllers only.)

9368987060-01_OM_en.p65

2/4/10, 4:45 PM

7

Advertising