Freestyle #705 User Manual

Freestyle Clock

Advertising
background image

KEY TO SYMBOLS

#705 SHANE DORIAN II

DIGITAL

WATCH INSTRUCTIONS

HOW TO SET THE TIME AND DATE
1 Select time display using the S3

button.

2 Select home time or foreign time

using the S2 button.

3 Hold the S2 button for two seconds.

The SET message will appear
momentarily. The second digits will
blink.

4 Press the S1 button to reset the

second digits to 00.

5 Press the S3 button. The minute

digits will blink.

6 Use the S1 button to set the

minutes. Press the button once to
increase the digits by one unit or
speed up the process by holding
down the button.

7 Press the S3 button.The hour digits

will blink.

8 Use the S1 button to set the hours.
9 Follow the same pattern to set the

day-of-the-month, month, day-of-
the-week, hour format and date
format. For the hour format,you can
choose 12-hour display with P
indicator or 24-hour display. As for
the date format, you can choose M-
D (month-day) or D-M (day-month).
The chosen formats will apply to
both home and foreign settings.

10 Press the S2 button to confirm the

settings and return to current time
display.

HOW TO SET THE DAILY ALARMS
1 Select alarm function using the S3

button.

2 Select home and foreign time alarm

using the S2 button.

3 Hold the S2 button for two seconds.

The SET message will appear.
The minute digits will blink.

4 Use the S1 button to set the

minutes.

5 Press the S3 button. The hour digits

will blink.

6 Use the S1 button to set the hours.
7 Press the S2 button to confirm and

exit.

HOW TO USE THE DAILY ALARMS
AND HOURLY CHIMES
To display the alarm time, select ALM 1
or ALM 2 mode using the S2 button in
alarm mode.
Use the S1 button to set the status of
the alarm and chime functions of the
chosen alarm. Press the button once to
activate the daily alarm. Press the
button again to activate the hourly
chime. Press the button a third time to
activate both functions. To deactivate
both, press the S1 button a fourth time.
The chime and alarm indicators will
appear when their respective functions
are active.

WHEN AN ALARM OR HOURLY
CHIME GOES OFF
A tune will go off by the hour if the
hourly chime function is activated and
a 20-second alarm tune will be emitted
at the designated time when the alarm
is active. To stop either tune, press any
button.
To disable the functions, select ALM 1
or ALM 2 and use S1 button to turn off
the indicator of the function as desired.

HOW TO USE THE STOPWATCH
For a straight forward count-up,
1 Select stopwatch mode using the S3

button. The last recorded time of the
stopwatch will be displayed.

Press the S2 button to clear the old
record.

2 Press the S1 button once to start the

stopwatch. The watch will start
counting from 00'00''00 if the watch
is cleared. Otherwise, it will pick up
from where it last left off. The watch

will count up to 59 minutes and
59.99 seconds before starting from
zero again.

3 To stop counting, press the S1

button once. Press the button again
to resume from where it left off. To
clear the stopwatch, press the S1
button to stop counting and then
press the S2 button.

The stopwatch is equipped with a split
function for you to keep track of
individual lap time. To use the function,
1 While the stopwatch is running,

press the S2 button once whenever
you want to register a lap.
The stopwatch is still running in the
background. To display the currently
accumulated time, press the S2

button.

2 Repeat the last step until you have

registered all the laps.

3 Press S1 to stop counting. Press the

button again to resume or press the
S2 button to clear.

Note: You can leave the stopwatch
running while switching over to other
operating modes. The STW indicator
will light up as a reminder.

HOW TO USE THE TIMER
To set the count down time,
1 Select timer mode using the S3

button. The last selected timer
setting will be displayed.

2 Use the S2 button to alter the

setting. You can select among 1, 3,
5, 10, 15, 20, 25, 30, 45 and 60
minutes.

To start a countdown, press the S1
button. Press the button again to stop
the countdown or a third time to
resume from where it left off.
After reaching zero on a countdown, a
20-second beep will go off. To stop the
beeping, press any button. The timer
will reload automatically.

BATTERY INFORMATION
The watch uses a 3.0V lithium button
cell battery, which in normal
circumstances will be good for 1-2
years. However, the battery life will
vary due to shelf time and the manner
the watch is used.

WARRANTY INFORMATION

Freestyle U.S.A. warrants, to the original
purchaser, that its watches are free from
defects in materials and workmanship
for a period of ten (10) years under normal
use. The warranty excludes batteries,
crystal, watch case plating, and strap/
bracelet/ band. The warranty excludes
normal wear and tear and abuse.

Special note: Freestyle® watches are
designed and engineered to be highly
water-resistant, and to withstand the most
active of lifestyles. The most important
component in keeping your watch water-
resistant is the case back O-ring, which
prevents water from entering the watch
through the case back.

Water leakage most often occurs after
improper battery replacement.
We strongly recommend having a certified
jeweler, watch repair technician or
Freestyle's service center replace your
battery. Water leakage due to improper
battery replacement is not covered under
warranty.

Should your Freestyle® watch require
warranty service, send it along with the
following:

1. A copy of your sales receipt

2. Your printed name and address
3. Your telephone number
4. A brief description of the problem
5. Please include $8.50 for processing

and handling, using one of the
following payment methods:

-Check
-Money order
-Credit card (be sure to include card
number and expiration date)

REMEMBER: NEVER INCLUDE A
SPECIAL WATCHBAND OR ANY
OTHER PERSONAL ARTICLES OF
VALUE IN YOUR SHIPMENT.

Send to the following address:

Freestyle
Attn: Individual Returns
47-50 33rd Street
Long Island City, NY 11101

(718)-729-8890

Please allow 30 days for return of your
watch.

Neither this warranty, nor any other
warranty expressed, is assumed for any
incidental or consequential damages,
including but not limited to the
mathematical accuracy of the product.
Some states do not allow limitations on
how long an implied warranty lasts, or
the exclusions of or limitations on
consequential damages, so the above
limitations may not apply to you. This
warranty gives you specific legal rights,
and you may have other rights which
vary from state to state.

This warranty applies to watches
purchased in the United States. For
watches purchased outside the United
States, please contact your authorized
Freestyle® dealer for warranty
information.

If your watch requires servicing not
covered under our warranty (battery,
crystal, strap/bracelet/band, watch case
plating), or refurbishing, complete the
return form (next column) and return with
your watch.

Visit our website at:

www.freestyleusa.com

8R02-SLO254A-NON

INTRODUCTION
Congratulations on your purchasing the
Easy-Set Watch II. Designed for easy
operation, the watch automatically tells
you which button to use in a setting
procedure. The watch has the following
functions:
• Real-time calendar clock for home

time

• Second calendar clock for foreign time
• Dual daily alarms and hourly chimes
• Stopwatch with split function
• 10 preset countdown timers
The watch is also equipped with an EL
back light to facilitate time reading at
night or in dim light.

HOW TO USE THE BACK LIGHT
Press the LIGHT button once to turn on
the back light for three seconds.

DISPLAY MODES
The watch has four display modes:
home time (TIME), home time alarm
(ALM1), stopwatch (STW) and
countdown timer (TMR).
To change from one display mode to
another, press the S3 button once. The
mode description will appear for two
seconds before activating the selected
mode.

HOME AND FOREIGN DISPLAY
To display the foreign time, press S2
when the home time is displayed. The
mode description (TM-2) will appear
shortly before the foreign time is
displayed. To change back to the home
time, press S2.
To display the daily alarm for foreign
time, press S2 when the daily alarm for
home time is displayed. The mode
description (ALM 2) will appear shortly
before the foreign time alarm is
displayed.

LIGHT

S3

S1

S2

FEATURES:

CURRENT TIME

DAY/MONTH/DATE

DAILY ALARM

HOURLY CHIME

STOPWATCH

COUNTDOWN TIMER

DUAL TIME

DUAL ALARM

WATER RESISTANT TO
330FT/100M

NIGHT VISION

BACK LIGHT

Advertising