Fujitsu Siemens Computers LifeBook B6220 - Manual (Page 3)

3
1. When you turn on or restart the computer there is
a beep and/or the following message appears on
the screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [
F1 ] key .
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [ F2 ] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
• If your notebook emits a series of beeps
that sounds like a code and the display
is blank, refer to the Troubleshooting
Section of the system User’s Guide. The
Troubleshooting Section includes a list
of error messages and their meanings.
• If your data security settings require it,
you may be asked for a password
before the operating system will be
loaded.
B S e r i e s B I O S