FUJITSU x178 User Manual
Page 12
English
11
Menu button
Use the Menu button (
4
) to activate the On Screen display (OSD).
With this button you also enter the submenu of the items shown in
the menu (colour temperature, colour control, degauss etc.).
How to use the Menu button
Push the Menu button (
4
) to call the main menu to the screen.
Use the arrow buttons (
3
) to choose an item. The selected item
is highlighted.
Enter the submenu of the selected item by pushing the Menu
button (
4
). The submenu shows the name and current setting
of the selection.
Use the arrow buttons (
3
) and the Menu button (
4
) to carry
out the adjusments or the functions.
The display unit automatically saves the new settings when the
menu disappears. To make the menu disappear immediatly,
push the Menu button (
4
) or choose Exit (see page 13).
1 .
2 .
3 .
4 .
5 .
What you see...
...and what you use it for.
Adjust pincushion distortion if the sides
of the screen image bow in or out,
and adjust trapezoid distortion if the bottom or
the top of the screen is too wide or narrow.
Adjust parallel distortion if the sides
of the screen image are tilted left or right,
and adjust rotation if the entire screen image
is tilted.
Fujitsu 8/16/92 5:16 PM Page 14